SYNTHALAT W 48
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Alkyds, Alkyds (Modified)AlkydsAlkyds (Modified)
SYNTHALAT W 48 is a water-thinnable, specially modified alkyd resin. It is recommended for water-thinnable top coat formulations with good color retention and very good water resistance. It has applications in wood flooring, furniture coatings, industrial maintenance, wood coatings and finishes, marine coatings, and transportation.
Product families
Applications
- Consumer Goods — Furniture
- Marine Coatings
- Wood Coatings & Finishes
- Marine Coatings
- Wood Flooring
- Furniture Coatings
- Industrial Coatings
- Industrial Maintenance
- Metal Coatings
- Marine
Product Families
- Alkyds
Other characteristics
- Brand
- SYNTHALAT
- End Uses
- Top Coat
- Compatible Substrates & Surfaces
- Metal, Wood
- Carrier
- Water
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Appearance
- Opaque
- Composition
SYNTHALAT W 48 has a Composition of Oil-type: drying fatty acids Oil-content: approx. 42 %
- Cure
- Chemical Cure
- Supplied As
approx. 35 % in BG/ammonia/water (8 : 0,5 : 56,5)
- Technology
- CASE Ingredients
- Application Methods
- Brush
- Dip Coating
- Spray
- Coating End Applications
- Top Coat
- Film Properties and Processing
Synthalat W 48 is used as a sole binder to make water-thinnable single-coat and top coat formulations. The coatings show early water resistance; white top coats have high whiteness retention. Primers and top coats can be dried both by forced-air drying, e.g. 15 min./85°C, and also at room temperature for 24 h, after which resistance to rain, mist and high atmospheric humidity is good. Rapid drying makes coatings based on Synthalat W 48 particularly suitable for spray application; smaller surface areas such as those encountered in retouching work can also be brush-painted. Dip coatings can also be made using appropriate formulations. Synthalat W 48 coatings are suitable for finishing agricultural equipment, commercial vehicles and construction machinery, and for industrial use in general. When adjusting the pH of the coating it is essential to make up the neutralizing agent which has volatilised during dispersion. We recommend adjusting the coating to pH 9.0 to 9.5 with ammonia. For Synthalat W48 we recommend following driers: 0,05%-0,15% Co, 0,1% Ca, 0,1-0,5% Zr relative to metal content on solid resin).
- Compatible Substrates and Surfaces
- Metal
- Wood
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 2.000-5.000 | mPas | AV-F-V005 |
| Density | approx. 1.01 | g/ml | AV-F-0D001 |
| Flash Point | approx. 62 | °C | AV-F-f006 |
| Non Volatile Content | 35.0 | w % | AV-F-F003 |
| pH | 7.5-9.0 | — | AV-F-P001 |
