To catalogue
Arnitel® XG01IM
- Chemical Family
- Polyesters
Arnitel® XG01IM is a high-performance thermoplastic copolyester (TPC) known for its flexibility, high temperature resistance, and strength, coupled with excellent processing characteristics. In industries such as automotive and E&E, Arnitel® XG01IM is gaining popularity as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material can be processed using both extrusion and injection molding technologies, making it versatile and suitable for various applications with specific demands.
Product families
Applications
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
Electrical & Electronics — Wire & Cable
- Power Transmission & Distribution
Product Families
Elastomers — Thermoplastic Elastomers
- Thermoplastic Polyester Elastomers (TPE-E)
Other characteristics
- Brand
- Arnitel
- Density
- 1100.0 - 1100.0 kg/m³
- Polymer Name
- Thermoplastic Copolyester Elastomer (TPC-ET)
- Strain at Break
- 550.0 - 550.0 %
- Processing Methods
- Extrusion, Injection Molding
- Markets
- Electrical & Electronics
- Technology
- Elastomers
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Quality Standards
- UL Yellow Card (E47960)
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 180 | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | -70 | °C | ISO 11357-1/-2 |
Table 2 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | 8.4E11 | Ohm*m | IEC 62631-3-1 |
| Electric Strength | 21.5 | kV/mm | IEC 60243-1 |
Table 3 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 0.16 | % | Sim. to ISO 62 |
| Humidity Absorption | 0.45 | % | Sim. to ISO 62 |
| Density | 1100 | kg/m³ | ISO 1183 |
Table 4 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 36 | MPa | ISO 527-1/-2 |
| Stress at 10% strain | 1.9 | MPa | ISO 527-1/-2 |
| Stress at 100% strain | 4.1 | MPa | ISO 527-1/-2 |
| Stress at Break | 8.8 | MPa | ISO 527-1/-2 |
| Nominal Strain at Break | 550 | % | ISO 527-1/-2 |
| Shore A Hardness (3s) | 82 | — | ISO 868 |
Table 5 of 6
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume-Flow Rate (at 230 / * °C, 2.16 / * kg) | 13.8 | cm³/10min | ISO 1133 |
Химическая стойкость
24 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetic acid (10% by mass) at 23°C | resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Ammonium hydroxide (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | ASTM 1 at 23°C | resistant |
| Other | ASTM 3 at 23°C | resistant |
| Other | Brake fluids (DOT 3/4) at 23°C | not resistant |
| Other | Calcium chloride (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Chloroform at 23°C | not resistant |
| Ethers | Diethyl ether at 23°C | limited resistant, tests necessary to verify |
| Alcohols | Ethanol at 23°C | limited resistant, tests necessary to verify |
| Other | Ethyl Acetate at 23°C | limited resistant, tests necessary to verify |
| Other | Fuel; Diesel at 85°C | resistant |
