EcoPaXX® Q150-D

Chemical Family: Polyamides

EcoPaXX® Q150-D is a long aliphatic polyamide that offers low moisture uptake, good dimensional stability, and excellent retention of properties. It belongs to the family of long-chain polyamides, which provide exceptional performance in demanding environments. It has excellent chemical resistance, low moisture absorption, a very high melting point, and a high crystallization rate. It has the lowest carbon footprint among common polyamides. The material can be processed using injection molding technology and meets the requirements for food contact quality. It is available in both low viscosity and medium-viscosity grades.

Product families

Plastics — Engineering & Specialty Polymers

Polyamides

Other characteristics

Brand: EcoPaXX
Polymer Name: Polyamide 410 (PA 410)
Flexural Modulus: 2900.0 - 2900.0 MPa
Processing Methods: Injection Molding
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Flame Rating: UL 94 HB
Technology: Plastics
Packaging Type: Bags
Boxes
Silos
Super Sacks
Labeling Claims: Bio-based
Food Contact Acceptable
Sustainable
Quality Standards: UL Yellow Card (E47960)
Material Features: Cleanable
Dimensional Stability
Food Contact Acceptable
Good Aesthetics
Good Processability
Heat Resistance
Light Weight
Low Viscosity

Technical data

Table 1 of 7

14 rows

Characteristic	Value	Unit	Method
Tensile Modulus	3100 / 1700	MPa	ISO 527-1/-2
Tensile Modulus (120°C)	750 / -	MPa	ISO 527-1/-2
Tensile Modulus (160°C)	540 / *	MPa	ISO 527-1/-2
Tensile Modulus (180°C)	400 / *	MPa	ISO 527-1/-2
Tensile Modulus (200°C)	300 / *	MPa	ISO 527-1/-2
Yield Stress	85 / 60	MPa	ISO 527-1/-2
Yield Strain	5 / 16	%	ISO 527-1/-2
Nominal Strain at Break	16 / >50	%	ISO 527-1/-2
Flexural Modulus	2900 / 1450	MPa	ISO 178
Flexural Strength	115 / 55	MPa	ISO 178
Charpy Impact Strength (at +23°C)	N / N	kJ/m²	ISO 179/1eU
Charpy Impact Strength (at -30°C)	N / N	kJ/m²	ISO 179/1eU

Table 2 of 7

8 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	250 / *	°C	ISO 11357-1/-3
Temperature of Deflection Under Load (1.80 MPa)	77 / *	°C	ISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)	175 / *	°C	ISO 75-1/-2
Coefficient of Linear Thermal Expansion (parallel)	0.7 / *	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.9 / *	E-4/°C	ISO 11359-1/-2
Burning Behaviour (at 3 / * mm Nominal Thickness)	UL HB / *	class	IEC 60695-11-10
Glow Wire Flammability Index (at thickness 0.8 / - mm)	825 / -	°C	IEC 60695-2-12
Glow Wire Ignition Temperature (at thickness 0.8 / - mm)	850 / -	°C	IEC 60695-2-13

Table 3 of 7

1 row

Characteristic	Value	Unit	Method
Viscosity Number	150 / *	cm³/g	ISO 307, 1157, 1628

Table 4 of 7

1 row

Characteristic	Value	Unit
Density of Melt	0.9 / *	kg/m³

Table 5 of 7

3 rows

Characteristic	Value	Unit	Method
Humidity Absorption	2 / *	%	Sim. to ISO 62
Density	1090 / -	kg/m³	ISO 1183
Biobased Content	70 / *	% (Bio C/Total C)	ASTM D6866-12 Method B

Table 6 of 7

2 rows

Characteristic	Value	Unit	Method
Molding Shrinkage (parallel)	1.2 / *	%	ISO 294-4
Molding Shrinkage (normal)	1.3 / *	%	ISO 294-4

Химическая стойкость

377 rows

Characteristic	Value	Unit
Other	Acetaldehyde (40% by mass) at 23°C	resistant
Other	Acetamide (50% by mass) at 23°C	limited resistant, tests necessary to verify
Other	Acetamide (50% by mass) at >140°C	not resistant
Other	Acetic acid (10% by mass) at 100°C	limited resistant, tests necessary to verify
Other	Acetic acid (10% by mass) at 23°C	resistant
Other	Acetic acid (95% by mass) at 23°C	limited resistant, tests necessary to verify
Ketones	Acetone at 23°C	resistant
Other	Acetophenone at 23°C	resistant
Other	Acetyl chloride at 23°C	limited resistant, tests necessary to verify
Other	Acetylene at 23°C	resistant
Other	Acrylic acid at 23°C	limited resistant, tests necessary to verify
Other	Aliphatic amines at 23°C	resistant