DeCAL RD713 21.27%
- CASE Ingredients Features
- Low Bleed Through
- Chemical Family
- Anionics, PolycarboxylatesAnionicsPolycarboxylates
DeCAL RD713 21.27% is an anionic superplasticizer that is based on polycarboxylate technology and is highly efficient. It is suitable for use in readymix concrete, mortars, self-leveling systems, adhesives, and grouts. DeCAL RD713 offers a very high deflocculation effect that enables it to maintain the dispersed state for longer periods, as compared to conventional plasticizers.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Plasticizer
Product families
- Functional Additives
- Cement & Concrete Additives
- Mortar & Gypsum Additives
Other characteristics
- Brand
- DeCAL
- Features
- Good Compatibility, Low Bleed Through
- Functions
- Plasticizer, Superplasticizer
- Dosage
DeCAL RD713 should be added directly to dry mix at the early stages of batch preparation. Activation in the wet state is rapid and a minimal wet mixing time of 2-3 minutes is recommended. Typical dosage rates are in the order of 0.1%-1.5% of the dry powder weight.
- Appearance
- Colourless liquid
- Shelf LIfe
- 1 Year
- Applications
DeCAL RD713 has applications in readymix concrete, mortars, concretes, self-leveling systems, adhesives and grouts.. DeCAL RD713 has a very high deflocculation effect which allows it to maintain the dispersed state for longer periods as compared to conventional plasticisers.
- Key Benefits
Prevents bleeding/segregation; High early and final strength; Good compatibility; High water reduction; Readymix Concrete with low water/cement ratios; Good initial flow with elongated open time during agitation
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Storage Condition
DeCAL RD713 has a shelf life of 1 years when stored correctly in a dry environment (5 - 35°C).
- Country Availability
- Canada
- USA
- Industrial Additives End Use
- Cement
- Concrete Admixtures
- Grouts
- Gypsum
- Masonry Mortar
- Industrial Additives Features
- Good Compatibility
- Industrial Additives Functions
- Superplasticizer
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Active Polymer | 21.27 | % |
| Ionic Character | Anionic | — |
| Density (at 20°C) | min. 1 | g/cm³ |
| pH | 2.5 - 3.5 | — |
