Akulon® S223-HG0
- Chemical Family
- Polyamides
Akulon® S223-HG0 is a high-performance material that combines the properties of polyamide 6 and polyamide 66. It is widely used by customers worldwide in various applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, this material excels in providing an excellent balance between ease of design and processing, all while delivering outstanding mechanical properties over a broad temperature range and under diverse conditions.
Product families
Applications
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
Product Families
- Polyamides
- Thermoplastic Resins
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 66 (PA 66)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Plastics
- OEM Standards
- BMW
- Jaguar Land Rover
- PSA
- Renault
- Volkswagen
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Heat Stabilized
- Light Weight
- OEM Specifications
- BMW GS 93016
- PSA Peugeot-Citroen FTM 64 0066
- RENAULT PMR
- TPJLR.52.154
- TPJLR.52.155
- VW 50133-PA66-8-A
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Automotive Drivetrain
- Door Panel
- Flooring
- Front End Modules
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- Front End Modules Application Data
Akulon® PA6 allows for reliable soulutions due to more temperature resistance than PP and better surface appearance than PA66; Akulon® PA6 allows for more cost effective solutions than PA66; Akulon® UltraFlow allows for even more cost effectiveness, since it enables 25% thinner walls and up to 25 % faster molding cycle times
- Timing Drive Systems Application Data
Stanyl® delivers best-in-class low-friction performance for improved efficiency; Stanyl® is a proven solution used by the world's top automakers; All grades are PFAS and PFOA free to ensure regulatory compliance and protect the environment; Bio-based material solutions available
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 5
48 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 16000 / 11500 | MPa | ISO 527-1/-2 |
| Tensile Modulus (-40°C) | 16500 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (40°C) | 15000 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (100°C) | 8000 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 7400 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (140°C) | 6900 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (150°C) | 6600 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 6300 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (180°C) | 5700 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (200°C) | 5200 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (210°C) | 4900 / * | MPa | ISO 527-1/-2 |
| Stress at Break | 240 / 170 | MPa | ISO 527-1/-2 |
Table 2 of 5
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 260 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 253 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 260 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.2 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.6 / * | E-4/°C | ISO 11359-1/-2 |
| Thermal Index (2500 hrs) | 183 / * | °C | IEC 60216/ISO 527-1/-2 |
| Thermal Index (5000 hrs) | 168 / * | °C | IEC 60216/ISO 527-1/-2 |
| Thermal Index (10000 hrs) | 154 / * | °C | IEC 60216/ISO 527-1/-2 |
| Thermal Index (20000 hrs) | 141 / * | °C | IEC 60216/ISO 527-1/-2 |
Table 3 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 4.2 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.2 / * | % | Sim. to ISO 62 |
| Density | 1570 / - | kg/m³ | ISO 1183 |
Table 4 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.4 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 1.2 / * | % | ISO 294-4 |
Химическая стойкость
384 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
