Akulon® N22D-H
- Chemical Family
- Polyamides
Akulon® N22D-H is a high-performance material that combines the characteristics of polyamide 6 and polyamide 66, making it a favored choice for customers worldwide across various industries, including automotive, electronics, electrical, furniture, and packaging. When used in molded parts, this material excels in providing an exceptional balance between easy design and processing, all while delivering outstanding mechanical properties across a wide temperature range and under diverse conditions.
Product families
Applications
- Exterior & Body
- Interior
Product Families
- Polyamides
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Flexural Modulus
- 2900.0 - 2900.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Light Weight
- Low Viscosity
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Plastics and Elastomers End Uses
- Door Panel
- Flooring
- Wheel Housing Parts
- Machinery for Injection Molding
Central bushing heated separately; Only use external heated system; Manifold heated from both sides; Tip with thermocouple in front (near gate); Very accurate temperature control in the gate area
- Plastics and Elastomers Functions
- Resin
- Grade Coding for Injection Molding
Akulon® PA6 non reinforced and non flame retardant injection molding grades.
Technical data
Table 1 of 4
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 3500 / - | MPa | ISO 527-1/-2 |
| Yield Stress | 72 / - | MPa | ISO 527-1/-2 |
| Yield Strain | 3.5 / - | % | ISO 527-1/-2 |
| Nominal Strain at Break | 14 / - | % | ISO 527-1/-2 |
| Flexural Modulus | 2900 / - | MPa | ISO 178 |
| Flexural Strength | 110 / - | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | N / - | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 4 / - | kJ/m² | ISO 179/1eA |
| Izod Notched Impact Strength (at +23°C) | 5.5 / - | kJ/m² | ISO 180/1A |
Table 2 of 4
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 65 / * | °C | ISO 75-1/-2 |
Table 3 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 9 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 2.5 / * | % | Sim. to ISO 62 |
| Density | 1120 / - | kg/m³ | ISO 1183 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
