To catalogue
Akulon® Ultraflow K-FKGS6/B
- Chemical Family
- Polyamides
Akulon® Ultraflow K-FKGS6/B is a versatile family of high-performance polyamide 6 and polyamide 66 materials widely employed by global customers in automotive, electronics, electrical, furniture, and packaging applications. In molded parts, these materials deliver an impressive blend of design flexibility and ease of processing, along with exceptional mechanical properties over a broad temperature range and diverse conditions. For extrusion, they set industry benchmarks, featuring remarkable strength, resilience, and ease of processing. The preferred processing technology for these materials is injection molding. Notable features encompass good or high flow characteristics, heat stabilization, and VDE certification.
Properties
- Photovoltaic Connector Application Data
UL V-0, 5VA classified; Suitable for outdoor use w.r.t. exposure to Ultraviolet Light; Suitable for outdoor use w.r.t. exposure to Water and Immersion in accordance with UL 746C.
Product families
Applications
Automotive & Transportation — Automotive
- Electrical & Electronic Systems
- Exterior & Body
- Interior
Electrical & Electronics — Devices & Assemblies
- Automotive Electronics
Electrical & Electronics — Parts & Components
- Connectors
- Photovoltaic Components
Industrial — Power, Water & Utilities
- Renewable Energy
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Industrial
- Flame Rating
- UL 94 5VA
- UL 94 V0
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Quality Standards
- UL Yellow Card (E43392)
- UL Yellow Card (E47960)
- Material Features
- Flame Retardant
- Heat Stabilized
- High Flow
- Light Weight
- UL Flame Rated
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Connectors
- Door Panel
- EV Charging Plugs
- Flooring
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- EV Charging Application Data
UV resistance for better surface appearance; High impact strength and toughness to reduce normal wear and tear; Compliant with UL and IEC regulations
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
29 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 12000 / 8300 | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 5400 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 3500 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (Low Thickness, 1mm) - Dry | 12000 | MPa | ISO 527-1/-2 |
| Tensile Modulus (Low Thickness) - cond. | 8000 | MPa | ISO 527-1/-2 |
| Stress at Break | 155 / 105 | MPa | ISO 527-1/-2 |
| Stress at Break (120°C) | 75 / - | MPa | ISO 527-1/-2 |
| Stress at Break (160°C) | 55 / * | MPa | ISO 527-1/-2 |
| Stress at Break, at low thickness | 150 / 95 | MPa | ISO 527-1/-2 |
| Stress at Break (Thickness tested) | 1 / - | mm | ISO 527-1/-2 |
| Strain at Break | 2.3 / 3.6 | % | ISO 527-1/-2 |
| Strain at Break (at 120°C) | 6.3 / - | % | ISO 527-1/-2 |
Table 2 of 7
20 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 205 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 215 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.2 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 1.1 / * | E-4/°C | ISO 11359-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL V-0 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL V-0 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 0.75 mm Nominal Thickness) | V-0 / * | class | IEC 60695-11-10 |
| Burning Behaviour 5V (at 1.5 / * mm thickness h) | UL 5VA / * | class | IEC 60695-11-20 |
| Ball Pressure Temperature | 210 / * | °C | IEC 60695-10-2 |
| Glow Wire Flammability Index (at thickness 0.75 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 3 / - mm) | 960 / - | °C | IEC 60695-2-12 |
Table 3 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.5 / 10 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.4 / 4 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 60 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 120 / 700 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E13 / 1E11 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E14 | Ohm | IEC 62631-3-2 |
| Comparative Tracking Index | 325 / - | V | IEC 60112 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1150 / * | kg/m³ |
| Thermal Conductivity of Melt | 0.26 / * | W/(m K) |
| Specific Heat Capacity Melt | 1900 / * | J/(kg K) |
| Effective Thermal Diffusivity | 1.2E-7 / * | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 4.5 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.3 / * | % | Sim. to ISO 62 |
| Density | 1550 / - | kg/m³ | ISO 1183 |
Table 6 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.21 / * | % | Sim. to ISO 294-4 |
| Molding Shrinkage (normal) | 0.77 / * | % | Sim. to ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
