Mascoat® Industrial-HR
- Chemical Family
- Acrylics & Acrylates
Mascoat® Industrial-HR is a coating comprised of proprietary air-encapsulated particulates with highly reflective properties that provides an insulating barrier, reduces solar loading, and prevents corrosion all in one application. The coating is specifically designed to be a multiple purpose coating solving painting and insulating issues.
Product families
Applications
- Industrial Coatings
Product Families
- Protective Coatings
Other characteristics
- Brand
- Mascoat
- Features
Fast Cure, Low VOC, Reflective, Thermally Insulating; High reflectance characteristics; Excellent thermal insulation at low thickness; Excellent personnel protection; Prevents Corrosion Under Insulation (CUI); Provides inspection ability w/o removal; Fast cure times; Low VOC product; Easy application to irregular surfaces
- Product Type
1K (1 component) Coating, Coating, Insulating Coating, Waterborne Coating; 1K (1 component) Coating; Coating; Insulating Coating; Waterborne Coating
- Application Method
- Brush, Roller, Spray
- Base
- Water-based Acrylic Insulation Coating
- Usage
- Gasoline Tanks
- HVAC
- Chilled Water Tanks
- Industrial Buildings
- Piping
- Water lines
- Storage Tanks
- And much more
- Gloss
- Flat
- Safety
For minimum protection, Mascoat recommends an N95 particulate respirator mask. For additional protection, a half mask respirator with organic vapor cartridge can be utilized. Eye protection recommended due to spray application method.
- Markets
- Paints & Coatings
- Priming
Self priming over non-ferrous materials (stainless steel & aluminum). Primer required for carbon steel substrates.
- Clean Up
- Equipment may be cleaned with soap & water.
- PACKAGING
Container Wet (with pail/lid) - 31 - 33 lbs/5 gallon pail; Net Contents - 28 - 29 lbs/5 gallon pail
- Shelf LIfe
- 18 months shelf life from manufacture date.
- Limitations
Peak operational temperature should not exceed 375˚F.; The maximum sustained temperature should not exceed 350˚F.
- Technology
- Ready-to-Use Products
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 3
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Wet Weight | 5.74 | lbs/gal |
| Weight Dry Film To Area (20 mils DFT) | 0.058 | lbs/ft² |
| Practical Volume Solids Content | 78 - 80 | % |
| Average Thickness per Coat (WFT, 70°F - 130°F) | 20 - 22 | mils |
| Practical Dry Coat Coverage (20 mils) | 50 - 55 | ft²/gal |
| VOC Content | 0.06 | g/l |
Table 2 of 3
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Chlorides | Low - None | — |
| UV Reflection | 99.9 | % |
| Application Temperature | 60 - 250 | °F |
| Peak Operation Temperature | max. 375 | °F |
| Sustained Operation Temperature | max. 350 | °F |
Table 3 of 3
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cyclic Salt Fog (2000 hrs) | Excellent | — | ASTM B-117 |
| UV-A Exposure (2000 hrs) | Excellent | h | ASTM D-5894 |
| Humidity Cabinet (2000 hrs) | Excellent | h | ASTM D-4585 |
| QUV (2000 hrs) | Excellent | h | ASTM G-154 |
| Permeability | Low - 4.98 | perms | ASTM 1653-03 |
| Transmission | Low - 4.14 | grains/hr/ft | ASTM 1653-03 |
| Cross Hatch Adhesion (100%) | 5B | — | ASTM D-3359 |
| Pull Apart Strength | 260 - 300 | psi | ASTM D-4541 |
| Elongation Rate | min. 30 | % | ASTM D-638 |
| Thermal Conductivity | 0.4381 | Btu.in/ft².hr.°F | Thermal Probe Study |
| Emmisivity | 0.85 | — | ASTM C-1371 |
| Solar Reflectivity | 0.86 | — | ASTM C-1549 |
