Arnite® TV4 260 S
Arnite® TV4 260 S is a high-performance engineering plastic known for its impressive combination of high strength, rigidity, and excellent processing characteristics. These qualities make it highly suitable for a wide variety of applications in the automotive, electrical, electronic, and consumer goods sectors.
Product families
Applications
- Electrical & Electronic Systems
- Housings & Enclosures
- Sensors & Actuators
Product Families
- Polyesters & Copolyesters
Other characteristics
- Brand
- Arnite
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 10600.0 - 10600.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Quality Standards
- UL Yellow Card (E47960)
- Material Features
- Flame Retardant
- UL Flame Rated
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Speed Sensor Application Data
Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties; Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs; ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C
- Plastics and Elastomers End Uses
- ADAS Sensors
- Automotive Electronics
- Housings
- Position Sensor
- Speed Sensor
- Temperature Sensor
- Plastics and Elastomers Functions
- Resin
- Positition Sensor Application Data
Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties; Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs; ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C
- Application Data
High design flexibility for molding thin-walled parts; High continuous use temperatures (CUT) for superior thermal load management; Excellent processing capabilities supporting easy injection molding; High hydrolytic and chemical resistance to extend part lifetimes; Cost-effective low Dk and Dk radome solutions; Medium conductivity grades minimizing reflections in midframes; High electric and thermal conductivity grades for back covers; Laser-welding options for rapidly bonding radomes and back covers
- Temperature Sensor Application Data
Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties; Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs; ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
27 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 11500 | MPa | ISO 527-1/-2 |
| Tensile Modulus (-40°C) | 12000 | MPa | ISO 527-1/-2 |
| Tensile Modulus (100°C) | 5500 | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 5000 | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 3900 | MPa | ISO 527-1/-2 |
| Tensile Modulus (180°C) | 3400 | MPa | ISO 527-1/-2 |
| Stress at Break | 135 | MPa | ISO 527-1/-2 |
| Stress at Break (-40°C) | 195 | MPa | ISO 527-1/-2 |
| Stress at Break (100°C) | 75 | MPa | ISO 527-1/-2 |
| Stress at Break (120°C) | 65 | MPa | ISO 527-1/-2 |
| Stress at Break (160°C) | 55 | MPa | ISO 527-1/-2 |
| Stress at Break (180°C) | 45 | MPa | ISO 527-1/-2 |
Table 2 of 7
18 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 225 | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 210 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 220 | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.35 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.7 | E-4/°C | ISO 11359-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL V-0 | class | IEC 60695-11-10 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL V-0 | class | IEC 60695-11-10 |
| Oxygen Index | 36 | % | ISO 4589-1/-2 |
| Glow Wire Flammability Index (at thickness 0.75 / - mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 1.5 / - mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at thickness 0.75 / - mm) | 725 | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at thickness 1.5 / - mm) | 750 | °C | IEC 60695-2-13 |
Table 3 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 4.1 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.9 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 20 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 150 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
| Electric Strength | 28 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 250 | V | IEC 60112 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1440 | kg/m³ |
| Thermal Conductivity of Melt | 0.153 | W/(m K) |
| Specific Heat Capacity Melt | 1740 | J/(kg K) |
| Effective Thermal Diffusivity | 6.12E-8 | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 0.3 | % | Sim. to ISO 62 |
| Humidity Absorption | 0.15 | % | Sim. to ISO 62 |
| Density | 1690 | kg/m³ | ISO 1183 |
Table 6 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.6 | % | Sim. to ISO 294-4 |
| Molding Shrinkage (normal, 3mm) | 1.4 | % | Sim. to ISO 294-4 |
Химическая стойкость
283 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetic acid (10% by mass) at 23°C | not resistant |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | limited resistant, tests necessary to verify |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Aliphatic amines at 23°C | resistant |
| Other | Aliphatic hydrocarbons at 23°C | resistant |
| Other | Allyl alcohol at 23°C | resistant |
| Other | Aluminum acetate (saturated) at 23°C | resistant |
| Other | Aluminum hydroxide (saturated) at 23°C | resistant |
| Other | Aluminum salts of mineral acids (saturated) at 23°C | resistant |
| Other | Amino acids (saturated) at 23°C | resistant |
