AFCONA 7510P
- CASE Ingredients Functions
- Rheology ModifierThinner
AFCONA 7510P is a block polymer with acidic functional groups and viscosity depressing properties in powder delivery form. It is recommended for use in unsaturated polyester, PVC, epoxy, and polyurethane resin systems. AFCONA 7510P is very similar to AFCONA 7500 and AFCONA 7520, but with a different modification. As a result, the performance of these three products is very close but may vary in different binder systems. Of the three products, AFCONA 7510P is the most hydrophilic.
Properties
- Physical Form
- Powder
Product families
Applications
- Interior Fixtures
Product Families
- Rheology Modifiers & Stabilizers
- Thixotropes
- Rheology Modifiers
Other characteristics
- Brand
- AFCONA
- Functions
- Rheology Modifier, Thinner, Viscosity Modifier
- Compatible Polymers & Resins
Epoxies (EP), Polyurethanes (PU), Polyvinyl Chloride (PVC), Unsaturated Polyester (UPE)
- Markets
- Building & Construction
- Appearance
- Fine White-off White Free Flowing Powder
- Technology
- CASE Ingredients
- Composite Materials
- Plastics
- Incorporation
AFCONA-7510 should be added prior to the dispersion process.
- Packaging Type
- Totes (IBC)
- Material Features
- Free Flowing
- High Performance
- Hydrophilic
- Low Viscosity
- Product Properties
AFCONA-7510 is recommended for unsaturated polyester, PVC, epoxy, and polyurethane resin systems. AFCONA-7510P is very close to AFCONA - 7500 and AFCONA-7520 but with a different modification. As a result, the performance is very close but in different binder systems, may behave differently in viscosity depressing. Among the three products, AFCONA-7510P demonstrates the highest hydrophilic behavior. It has very good viscosity depressing properties in highly filled system. It is very suitable for ATH systems or artificial marble applications.; Due to it high acidic functionality, AFCONA - 7510P also can be used in BMC systems as a viscosity stabilizer. AFCONA-7510P also has very good wetting power to fiberglass.; Note: AFCONA-7510 is a fine free flowing powder form at room temperature and is designed for use in powder coatings or other applications where powdered delivery form is preferred
- Addition and Dosage
Pigments/fillers:0.5 - 5.0% based on pigment/filler weight; Viscosity stabilizer:0.2 – 1.0% based on resin weight
- Storage Information
AFCONA-7510 should be stored in a cool dry place. When kept in an original unopened container, it will keep up to 5 years from the date of manufacture. The expiry date is indicated on the container.
- Chemical Composition
- Acidic functional block polymer.
- Country Availability
- Canada
- USA
- Packaging Information
- 55LB and 436lb non-returnable containers.
- Coating End Applications
- Powder Coating
- Compatible Polymers and Resins
- Epoxies (EP)
- Polyurethanes (PU)
- Polyvinyl Chloride (PVC)
- Unsaturated Polyester (UPE)
- Composite Materials Functions
- Viscosity Modifier
- Plastics and Elastomers End Uses
- Synthetic Marble
- Plastics and Elastomers Functions
- Viscosity Modifier
- Compatible Substrates and Surfaces
- Fiberglass
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Acid Value | 120 - 140 | mg KOH/g |
| Active Ingredients Content (Absorbed onto Silica) | 82.0 | % |
| Density (at 20°C) | 0.87 - 0.88 | g/cm³ |
| Flash Point | 122.0 | °C |
