SYNTHOESTER 1110
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Polyesters
SYNTHOESTER 1110 is a branched, saturated polyester containing hydroxyl groups. Used in combination with aromatic polyisocyantes for air- and stove-drying two-component coatings. It is used with desmodur L as the crosslinking partner for anti-corrosive primers with excellent adhesion. It has applications in industrial coatings, wood flooring, furniture coatings, packaging, and paper applications.
Product families
Applications
- Consumer Goods — Furniture; Printing & Packaging — Other Printing & Packaging Applications
- Wood Coatings & Finishes
- Wood Flooring
- Furniture Coatings
- Industrial Coatings
- Other Packaging & Paper Applications
Product Families
- Polyesters
Other characteristics
- Brand
- SYNTHOESTER
- End Uses
- Solventless & High Solids Coating
- Compatible Substrates & Surfaces
- Paper, Wood
- Markets
- Adhesives & Sealants
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Printing & Packaging
- Storage
SYNTHOESTER 1110 should be stored in closed containers, protected from moisture, the product has a shelf live at least 6 mounth.
- Cure
- Chemical Cure
- Dilutability
Synthoester 110 can be diluted in any proportion with esters, ketones and glycol ether esters. Aromatic compounds can be incorporated in small amounts. Care must be taken that only anydrous solvents and solvents that do not contain any hydroxyl groups are used.
- Pigmentation
All neutral pigments and fillers are suitable for pigmentation. Basic pigments and pigments containing soluble metallic compounds may exert a catalytic effect on curing and shorten the pot life of finished mixed batches.
- Technology
- CASE Ingredients
- Compatibility
Synthoester 1110 is compatible with the poyiso-cyanates Desmodur N, L, HL, IL and VL. It is also compatible with Synthoester 1018, 1065, 1080, 1120, 1130, 1065 and 1065 special.
- Coating End Applications
- Solventless & High Solids Coating
- Properties and Fields of use
SYNTHOESTER 1110 is used in combination with aromatic polyisocyantes air- and stove-drying two-component coatings. Synthoester 1110 is used with Desmodur L as the crosslinking partner for anti-corrosive primers with excellent adhesion. In addition impact resistant and hard films are obtained in combination with Synthoester 1018 or 1080.
- Compatible Substrates and Surfaces
- Paper
- Wood
- Mixing ratio with poly-isocyanates
Assuming equivalent reaction of the reactive groups (NCO:OH = 1:1), the following formula applies for the calculation of the amount of polyisocyanate to be added (relative to 100 parts by weight of solid Synthoester 1110): Amount of 42 X 100 x 6.5 polyisocyanate = ---------------- to be added: 17 x NCO % 42 = molecular weight of the NCO group 17 = molecular weight of the OH group 6.5 = hydroxyl content of Syntheoster 1110 in % relative to non-volatile components. Best results are obtained with a mixing ratio of 100 parts by weight Synthoester 1110 with 140 parts by weight Desmodur L 67%
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 300-600 | mPas | AV-F-V005 |
| Acid Value | max. 4 | mg KOH/g | — |
| Color | max. 4 | Iodine | — |
| Density | 1.16 | g/ml | AV-F-0D001 |
| Flash Point | approx. 64 | °C | AV-F-f006 |
| Hydroxyl Content | 220-240 | % | Relative to NVC |
| Hydroxyl Content | approx. 6.5 | % | AV-F-H003 |
| Non Volatile Content | 100.0 | w % | AV-F-F003 |
