LIOPUR PFL 2315
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Polyurethanes (PU)
LIOPUR PFL 2315 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination that is solvent- and TEA-free. After air-drying, film coatings based on LIOPUR PFL 2315 form transparent films that are tack-free and exhibit good surface hardness. It has applications in architectural coatings, furniture, wood coatings and finishes, industrial coatings, and wood flooring.
Properties
- Physical Form
- Dispersion
Product families
Applications
- Consumer Goods — Furniture
- Architectural Coatings
- Wood Coatings & Finishes
- Architectural Coatings
- Wood Flooring
- Furniture Coatings
- Industrial Coatings
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- LIOPUR
- End Uses
- 2K (2 component) Coating
- Compatible Substrates & Surfaces
- Plastics, Wood
- Carrier
- Water
- Markets
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Storage
LIOPUR PFL 2315 consists of dispersion which should be stored in tightly sealed containers in a frost-free place. It contains preservative.
- Appearance
- Colloidal to transparent
- Cure
- Chemical Cure
- Supplied As
- 35%ig in water
- Technology
- CASE Ingredients
- Coating End Applications
- 2K (2 component) Coating
- Properties and Fields of use
LIOPUR PFL 2315 is good after air-drying, film coatings based on LIOPUR PFL 2315 form transparent films which are tack-free and exhibit good surface hardness. Films based on LIOPUR PFL 2315 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 2315 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 2315 is distinguished by good grain enhancement of the wood for waterthinnable formulations. LIOPUR PFL2315 contains NCO-reactive groups, so that a binder/hardener ratio of 100 : 10 can be recommended on the basis of our applicational tests. Two-pack formulations based on LIOPUR PFL 2315 and polyisocyanates which have been made water-miscible are distinguished by simple manual incorporation of the hardener component into the base paint, so that these formulations are also suitable for DIY applications.
- Compatible Substrates and Surfaces
- Plastics
- Wood
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | ca 20 | mPas | AV-F-V005 |
| Minimum Film Forming Temperature | max. 1 | °C | — |
| Non Volatile Content | 7.0-9.0 | w % | AV-F-F003 |
| pH | 20-500 | — | AV-F-P001 |
