To catalogue
Arnite® T06 200 SNF
Arnite® T06 200 SNF is a high-performance engineering plastic known for its impressive combination of high strength, rigidity, and excellent processing characteristics. These qualities make it a suitable choice for a wide spectrum of applications in the automotive, electrical and electronics, and consumer goods sectors.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Electrical & Electronics — Parts & Components
- Connectors
Product Families
Plastics — Engineering & Specialty Polymers
- Polyesters & Copolyesters
Other characteristics
- Brand
- Arnite
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Flexural Modulus
- 2400.0 - 2400.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Quality Standards
- UL Yellow Card (E47960)
- Material Features
- Flame Retardant
- High Flow
- UL Flame Rated
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Plastics and Elastomers End Uses
- Connectors
- Plastics and Elastomers Functions
- Resin
- White Good Connectors Application Data
Arnite® PBT allows for reliable solutions due to good electrical and mechanical properties (especially toughness and ductility) at low & high temperatures, excellent CTI values, UL94 V2 at 0.75 mm certification. Arnite® PBT allows for reliable connector solutions with film hinges and snap-fit features
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
27 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 2600 | MPa | ISO 527-1/-2 |
| Tensile Modulus (-40°C) | 3400 | MPa | ISO 527-1/-2 |
| Tensile Modulus (100°C) | 450 | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 350 | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 155 | MPa | ISO 527-1/-2 |
| Tensile Modulus (180°C) | 155 | MPa | ISO 527-1/-2 |
| Yield Stress | 50 | MPa | ISO 527-1/-2 |
| Yield Stress (at -40°C) | 90 | MPa | ISO 527-1/-2 |
| Yield Strain | 4.5 | % | ISO 527-1/-2 |
| Yield Strain (at -40°C) | 7 | % | ISO 527-1/-2 |
| Stress at Break | 45 | MPa | ISO 527-1/-2 |
| Stress at Break (-40°C) | 90 | MPa | ISO 527-1/-2 |
Table 2 of 6
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 225 | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 60 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 140 | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.9 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.9 | E-4/°C | ISO 11359-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL V-0 | class | IEC 60695-11-10 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL V-0 | class | IEC 60695-11-10 |
| Glow Wire Flammability Index (at thickness 1.5 / - mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 0.75 / - mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at thickness 1.5 / - mm) | 675 | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at thickness 0.75 / - mm) | 900 | °C | IEC 60695-2-13 |
| Relative Temperature Index (Electrical, 0.75 mm) | 140 | °C | UL746B |
Table 3 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.4 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.2 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 30 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 220 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
Table 4 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 0.45 | % | Sim. to ISO 62 |
| Humidity Absorption | 0.18 | % | Sim. to ISO 62 |
| Density | 1400 | kg/m³ | ISO 1183 |
Table 5 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume-Flow Rate (at 250 / * °C, 2.16 / * kg) | 5 | cm³/10min | ISO 1133 |
| Melt Flow Index (at 250 / * °C, 2.16 / * kg) | 4 | g/10min | ISO 1133 |
| Molding Shrinkage (parallel) | 2.3 | % | ISO 294-4 |
| Molding Shrinkage (normal) | 2 | % | ISO 294-4 |
Химическая стойкость
283 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetic acid (10% by mass) at 23°C | not resistant |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | limited resistant, tests necessary to verify |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Aliphatic amines at 23°C | resistant |
| Other | Aliphatic hydrocarbons at 23°C | resistant |
| Other | Allyl alcohol at 23°C | resistant |
| Other | Aluminum acetate (saturated) at 23°C | resistant |
| Other | Aluminum hydroxide (saturated) at 23°C | resistant |
| Other | Aluminum salts of mineral acids (saturated) at 23°C | resistant |
| Other | Amino acids (saturated) at 23°C | resistant |
