Arnite® T06 202

Name: Arnite® T06 202
Brand: Arnite

Arnite® T06 202 is a high-performance engineering plastic renowned for its impressive combination of high strength, rigidity, and excellent processing characteristics. These qualities make it a suitable choice for a wide range of applications in the automotive, electrical and electronic, and consumer goods sectors.

Product families

Applications

Automotive & Transportation — Automotive

Electrical & Electronic Systems

Electrical & Electronics — Devices & Assemblies

Automotive Electronics

Electrical & Electronics — Parts & Components

Connectors

Product Families

Plastics — Engineering & Specialty Polymers

Polyesters & Copolyesters

Other characteristics

Brand: Arnite
Polymer Name: Polybutylene Terephthalate (PBT)
Flexural Modulus: 2600.0 - 2600.0 MPa
Processing Methods: Injection Molding
Markets: Automotive & Transportation
Electrical & Electronics
Flame Rating: UL 94 HB
Technology: Plastics
OEM Standards: Callout
General Motors
Mercedes
Packaging Type: Bags
Boxes
Silos
Super Sacks
Labeling Claims: Food Contact Acceptable
Material Features: Food Contact Acceptable
UL Flame Rated
OEM Specifications: CALLOUT ASTM D5927 TPES 0115
GM GMW17539P-PBT
MERCEDES DBL 5410
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
UL 94
Plastics and Elastomers End Uses: Automotive Electronics
Connectors
Plastics and Elastomers Functions: Resin
Automotive Connectors Application Data: Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties; Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs; ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C; Arnite® PBT allows for reliable effective solutions especially because of very good electrical properties at elevated temperatures
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 7

22 rows

Characteristic	Value	Unit	Method
Tensile Modulus	2600	MPa	ISO 527-1/-2
Tensile Modulus (-40°C)	3100	MPa	ISO 527-1/-2
Tensile Modulus (100°C)	400	MPa	ISO 527-1/-2
Tensile Modulus (120°C)	350	MPa	ISO 527-1/-2
Tensile Modulus (160°C)	220	MPa	ISO 527-1/-2
Tensile Modulus (180°C)	180	MPa	ISO 527-1/-2
Yield Stress	60	MPa	ISO 527-1/-2
Yield Stress (at -40°C)	100	MPa	ISO 527-1/-2
Yield Stress (at 100°C)	25	MPa	ISO 527-1/-2
Yield Strain	3.5	%	ISO 527-1/-2
Yield Strain (at -40°C)	7	%	ISO 527-1/-2
Nominal Strain at Break	>50	%	ISO 527-1/-2

Table 2 of 7

17 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	225	°C	ISO 11357-1/-3
Temperature of Deflection Under Load (1.80 MPa)	55	°C	ISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)	165	°C	ISO 75-1/-2
Coefficient of Linear Thermal Expansion (parallel)	0.9	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.9	E-4/°C	ISO 11359-1/-2
Burning Behaviour (at 1.5 mm Nominal Thickness)	UL HB	class	IEC 60695-11-10
Burning Behaviour (at 3.0 mm Nominal Thickness)	UL HB	class	IEC 60695-11-10
Glow Wire Flammability Index (at thickness 1.5 / - mm)	850	°C	IEC 60695-2-12
Glow Wire Flammability Index (at thickness 3 / - mm)	850	°C	IEC 60695-2-12
Glow Wire Ignition Temperature (at thickness 1.5 / - mm)	900	°C	IEC 60695-2-13
Glow Wire Ignition Temperature (at thickness 3 / - mm)	850	°C	IEC 60695-2-13
Relative Temperature Index (Electrical, 0.75 mm)	130	°C	UL746B

Table 3 of 7

7 rows

Characteristic	Value	Unit	Method
Relative Permittivity (100Hz)	3.5	—	IEC 62631-2-1
Relative Permittivity (1 MHz)	3.2	—	IEC 62631-2-1
Dissipation Factor (100 Hz)	20	E-4	IEC 62631-2-1
Dissipation Factor (1 MHz)	200	E-4	IEC 62631-2-1
Volume Resistivity	>1E13	Ohm*m	IEC 62631-3-1
Electric Strength	27	kV/mm	IEC 60243-1
Comparative Tracking Index	600	V	IEC 60112

Table 4 of 7

4 rows

Characteristic	Value	Unit
Density of Melt	1040	kg/m³
Thermal Conductivity of Melt	0.109	W/(m K)
Specific Heat Capacity Melt	2260	J/(kg K)
Effective Thermal Diffusivity	4.65E-8	m²/s

Table 5 of 7

3 rows

Characteristic	Value	Unit	Method
Water Absorption	0.45	%	Sim. to ISO 62
Humidity Absorption	0.18	%	Sim. to ISO 62
Density	1300	kg/m³	ISO 1183

Table 6 of 7