To catalogue
Arnite® AV2 390 XT
- Chemical Family
- Polyethylene Terephthalate (PET)
Arnite® AV2 390 XT is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology is best suited for injection molding.
Product families
Applications
Automotive & Transportation — Automotive
- Exterior & Body
Product Families
Plastics — Engineering & Specialty Polymers
- Polyesters & Copolyesters
Other characteristics
- Brand
- Arnite
- Polymer Name
- Polyethylene Terephthalate (PET)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Technology
- Plastics
- OEM Standards
- General Motors
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- OEM Specifications
- GM GMW15702-020912-PET GF 50
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 6
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 18500 | MPa | ISO 527-1/-2 |
| Stress at Break | 205 | MPa | ISO 527-1/-2 |
| Strain at Break | 1.7 | % | ISO 527-1/-2 |
| Charpy Impact Strength (at +23°C) | 65 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | 60 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 8.5 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | 8.5 | kJ/m² | ISO 179/1eA |
Table 2 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 255 | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 232 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 250 | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.13 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.48 | E-4/°C | ISO 11359-1/-2 |
Table 3 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.8 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.5 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 20 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 110 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
Table 4 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 0.3 | % | Sim. to ISO 62 |
| Humidity Absorption | 0.12 | % | Sim. to ISO 62 |
| Density | 1810 | kg/m³ | ISO 1183 |
Table 5 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.45 | % | Sim. to ISO 294-4 |
| Molding Shrinkage (normal) | 0.8 | % | Sim. to ISO 294-4 |
Химическая стойкость
215 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | resistant |
| Other | Acetic acid (10% by mass) at 23°C | resistant |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acrylic acid at 23°C | resistant |
| Other | Aliphatic amines at 23°C | resistant |
| Other | Aliphatic hydrocarbons at 23°C | resistant |
| Other | Alkylbenzenes at 23°C | resistant |
| Other | Allyl alcohol at 23°C | resistant |
| Other | Aluminum hydroxide (saturated) at 23°C | resistant |
| Other | Aluminum salts of mineral acids (saturated) at 23°C | resistant |
| Other | Ammonia at 23°C | limited resistant, tests necessary to verify |
