To catalogue
Arnite® T08 200
Arnite® T08 200 is a high-performance engineering plastic renowned for its impressive combination of high strength, rigidity, and excellent processing characteristics. These qualities make it highly suitable for a wide range of applications in the automotive, electrical and electronics, and consumer goods sectors.
Product families
Applications
Electrical & Electronics — Wire & Cable
- Building Wires & Power Cables
- Optical Fiber & Telecom
Product Families
Plastics — Engineering & Specialty Polymers
- Polyesters & Copolyesters
Other characteristics
- Brand
- Arnite
- Polymer Name
- Polybutylene Terephthalate (PBT)
- Processing Methods
- Extrusion, Injection Molding
- Markets
- Electrical & Electronics
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Food Contact Acceptable
- High Viscosity
- UL Flame Rated
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 2550 | MPa | ISO 527-1/-2 |
| Yield Stress | 55 | MPa | ISO 527-1/-2 |
| Yield Strain | 3.5 | % | ISO 527-1/-2 |
| Nominal Strain at Break | >50 | % | ISO 527-1/-2 |
| Charpy Impact Strength (at +23°C) | N | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | N | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 6 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | 6 | kJ/m² | ISO 179/1eA |
Table 2 of 7
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 225 | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 55 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 170 | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.9 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.9 | E-4/°C | ISO 11359-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL HB | class | IEC 60695-11-10 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL HB | class | IEC 60695-11-10 |
| Relative Temperature Index (Electrical, 0.75 mm) | 130 | °C | UL746B |
| Relative Temperature Index (Electrical, 3 mm) | 130 | °C | UL746B |
| Relative Temperature Index (with impact, 0.75 mm) | 95 | °C | UL746B |
| Relative Temperature Index (with impact, 3 mm) | 110 | °C | UL746B |
| Relative Temperature Index (without impact, 0.75 mm) | 125 | °C | UL746B |
Table 3 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.5 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.2 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 20 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 200 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
| Electric Strength | 27 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1040 | kg/m³ |
| Thermal Conductivity of Melt | 0.109 | W/(m K) |
| Specific Heat Capacity Melt | 2260 | J/(kg K) |
| Effective Thermal Diffusivity | 4.65E-8 | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 0.45 | % | Sim. to ISO 62 |
| Humidity Absorption | 0.18 | % | Sim. to ISO 62 |
| Density | 1300 | kg/m³ | ISO 1183 |
Table 6 of 7
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume-Flow Rate (at 250 / * °C, 2.16 / * kg) | 10 | cm³/10min | ISO 1133 |
Химическая стойкость
283 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetic acid (10% by mass) at 23°C | not resistant |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | limited resistant, tests necessary to verify |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Aliphatic amines at 23°C | resistant |
| Other | Aliphatic hydrocarbons at 23°C | resistant |
| Other | Allyl alcohol at 23°C | resistant |
| Other | Aluminum acetate (saturated) at 23°C | resistant |
| Other | Aluminum hydroxide (saturated) at 23°C | resistant |
| Other | Aluminum salts of mineral acids (saturated) at 23°C | resistant |
| Other | Amino acids (saturated) at 23°C | resistant |
