Akulon® Ultraflow K-FHGR24
- Chemical Family
- Polyamides
Akulon® Ultraflow K-FHGR24 is a high-performance polyamide 6 and polyamide 66 material trusted worldwide for a multitude of applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, it delivers an exceptional equilibrium between design simplicity and processing ease, accompanied by outstanding mechanical properties over a broad temperature range and in diverse conditions. For extrusion, it sets industry benchmarks, featuring impressive strength, resilience, and ease of processing. Injection molding is the preferred method, and key attributes include 10% glass reinforcement, 20% glass beads reinforcement, heat stabilization, and high flow characteristics.
Product families
Applications
- Electrical & Electronic Systems
- Exterior & Body
- Interior
- Automotive Electronics
Product Families
- Polyamides
- Thermoplastic Resins
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Ball, Glass Bead, Glass Fiber
- Glass Ball
- Glass Bead
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Heat Stabilized
- High Flow
- Light Weight
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Application Data
Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties. Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Fuse Holders Application Data
Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties. Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability
- Plastics and Elastomers End Uses
- Door Panel
- E-Boxes
- Flooring
- Fuse Holders
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 6000 / 3500 | MPa | ISO 527-1/-2 |
| Stress at Break | 85 / 55 | MPa | ISO 527-1/-2 |
| Strain at Break | 2.5 / 5 | % | ISO 527-1/-2 |
| Flexural Modulus | 4900 / 2300 | MPa | ISO 178 |
| Flexural Strength | 124 / 63 | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | 21 / - | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | 21 / - | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 4 / 6 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | 4 / 4 | kJ/m² | ISO 179/1eA |
Table 2 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 190 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 215 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.35 / * | E-4/°C | ISO 11359-1/-2 |
Table 3 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.5 / 14 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.3 / 4.5 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 50 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 150 / 1200 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E12 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E13 | Ohm | IEC 62631-3-2 |
| Electric Strength | 35 / 25 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 350 / 350 | V | IEC 60112 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1160 / * | kg/m³ |
| Thermal Conductivity of Melt | 0.29 / * | W/(m K) |
| Specific Heat Capacity Melt | 2230 / * | J/(kg K) |
| Effective Thermal Diffusivity | 1.43E-7 / * | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 6.5 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.9 / * | % | Sim. to ISO 62 |
| Density | 1350 / - | kg/m³ | ISO 1183 |
Table 6 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume-Flow Rate (at 250 / * °C, 2.16 / * kg) | 18 / * | cm³/10min | ISO 1133 |
| Melt Flow Index (at 2.16 / * kg) | 21 / * | g/10min | ISO 1133 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
