To catalogue
Akulon® Ultraflow K-FHG7 /A
- Chemical Family
- Polyamides
Akulon® Ultraflow K-FHG7 /A is a high-performance polyamide 6 and polyamide 66 material utilized worldwide across various applications, including automotive, electronics, electrical, furniture, and packaging. It excels in molded parts, striking an impressive balance between design flexibility and processing ease, while delivering outstanding mechanical properties over a wide temperature range and in diverse conditions. In extrusion, it establishes industry standards, boasting exceptional strength, resilience, and ease of processing. Injection molding is the preferred method, and key features encompass 35% glass reinforcement, heat stabilization, and high flow capabilities.
Product families
Automotive & Transportation — Automotive
- Cooling & Climate
- Exterior & Body
- Interior
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Plastics
- OEM Standards
- Chrysler
- Mercedes
- PSA
- Renault
- Volkswagen
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Heat Stabilized
- High Flow
- Light Weight
- OEM Specifications
- CHRYSLER MS-50017 CPN3884
- MERCEDES DBL 5408.33
- PSA Peugeot-Citroen FTM 64 0043
- RENAULT PMR
- VW 50134
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Fan and Shrouds Application Data
- Faster injection molding process
- Holding step eliminated
- Shorter cooling time
- Lower weight
- Lower warpage
- Plastics and Elastomers End Uses
- Automotive Instrument Panel
- Cylinder Head Covers
- Door Panel
- Fans
- Flooring
- Front Spoiler
- Off-Road Vehicle Oil Pans
- Off-Road Vehicle Oil Reservoirs
- Sunroof Frame Application Data
- Faster injection molding process
- Holding step eliminated
- Shorter cooling time
- Lower weight
- Lower warpage
- Plastics and Elastomers Functions
- Resin
- Instrument Panels Application Data
- Faster injection molding process
- Holding step eliminated
- Shorter cooling time
- Lower weight
- Lower warpage
- Application Data
- Faster injection molding process
- Holding step eliminated
- Shorter cooling time
- Lower weight
- Lower warpage
Technical data
Table 1 of 7
32 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 11000 / 7000 | MPa | ISO 527-1/-2 |
| Tensile Modulus (100°C) | 4700 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 4350 / - | MPa | ISO 527-1/-2 |
| Tensile Modulus (150°C) | 3800 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 3600 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (180°C) | 3250 / * | MPa | ISO 527-1/-2 |
| Tensile Modulus (200°C) | 2650 / * | MPa | ISO 527-1/-2 |
| Stress at Break | 185 / 125 | MPa | ISO 527-1/-2 |
| Stress at Break (100°C) | 95 / - | MPa | ISO 527-1/-2 |
| Stress at Break (120°C) | 90 / - | MPa | ISO 527-1/-2 |
| Stress at Break (150°C) | 75 / * | MPa | ISO 527-1/-2 |
| Stress at Break (160°C) | 70 / * | MPa | ISO 527-1/-2 |
Table 2 of 7
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 200 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 220 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (8.00 MPa) | 177 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.15 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.6 / * | E-4/°C | ISO 11359-1/-2 |
Table 3 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.5 / 14 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.3 / 4.4 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 50 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 150 / 1200 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | >1E13 / >1E13 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / >1E15 | Ohm | IEC 62631-3-2 |
| Comparative Tracking Index | 500 / - | V | IEC 60112 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1200 / * | kg/m³ |
| Thermal Conductivity of Melt | 0.27 / * | W/(m K) |
| Specific Heat Capacity Melt | 2170 / * | J/(kg K) |
| Effective Thermal Diffusivity | 1.02E-7 / * | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 5.6 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.7 / * | % | Sim. to ISO 62 |
| Density | 1400 / - | kg/m³ | ISO 1183 |
Table 6 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.3 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 1 / * | % | ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
