Akulon® N24-G8
- Chemical Family
- Polyamides
Akulon® N24-G8 represents a family of high-performance materials that combine the attributes of polyamide 6 and polyamide 66. These materials are widely utilized by customers across the globe in diverse applications, spanning automotive, electronics, electrical, furniture, and packaging. In molded parts, these materials excel in providing a remarkable balance between ease of design and processing, all while delivering exceptional mechanical properties over a broad temperature range and under varying conditions.
Product families
- Exterior & Body
- Interior
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Processing Methods
Blow Molding, Extrusion, Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Light Weight
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Door Panel
- Flooring
- Wheel Housing Parts
- Machinery for Injection Molding
Central bushing heated separately; Only use external heated system; Manifold heated from both sides; Tip with thermocouple in front (near gate); Very accurate temperature control in the gate area
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 12000 / - | MPa | ISO 527-1/-2 |
| Stress at Break | 200 / - | MPa | ISO 527-1/-2 |
| Strain at Break | 2.5 / - | % | ISO 527-1/-2 |
| Charpy Impact Strength (at +23°C) | 80 / - | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 14 / - | kJ/m² | ISO 179/1eA |
Table 2 of 5
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 210 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 220 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.2 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.5 / * | E-4/°C | ISO 11359-1/-2 |
Table 3 of 5
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.5 / - | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.3 / - | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 50 / - | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 150 / - | E-4 | IEC 62631-2-1 |
| Volume Resistivity | >1E13 / - | Ohm*m | IEC 62631-3-1 |
| Comparative Tracking Index | 500 / - | V | IEC 60112 |
Table 4 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 5.5 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.7 / * | % | Sim. to ISO 62 |
| Density | 1450 / - | kg/m³ | ISO 1183 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
