To catalogue
Akulon® K224-LG6U
- Chemical Family
- Polyamides
Akulon® K224-LG6U is a lightweight polyamide 6 (PA 6) resin and finds applications in the automotive and transportation industries, specifically in the production of exterior and body components as well as interior parts. This is typically processed using injection molding techniques.
Product families
Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Plastics
- OEM Standards
- Chrysler
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Light Weight
- OEM Specifications
- CHRYSLER MS-50017 CPN2625
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Door Panel
- Flooring
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 10500 / 6600 | MPa | ISO 527-1/-2 |
| Stress at Break | 185 / 110 | MPa | ISO 527-1/-2 |
| Strain at Break | 3.5 / 5 | % | ISO 527-1/-2 |
| Flexural Modulus | 9500 / - | MPa | ISO 178 |
| Flexural Strength | 280 / - | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | 95 / 110 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | 75 / 70 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 13 / 30 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | 12 / 11 | kJ/m² | ISO 179/1eA |
| Izod Notched Impact Strength (at +23°C) | 13 / - | kJ/m² | ISO 180/1A |
Table 2 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 210 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 220 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.2 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.7 / * | E-4/°C | ISO 11359-1/-2 |
Table 3 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.5 / 20 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.3 / 5 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 50 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 150 / 1200 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E12 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E13 | Ohm | IEC 62631-3-2 |
| Electric Strength | 30 / 25 | kV/mm | IEC 60243-1 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1200 / * | kg/m³ |
| Thermal Conductivity of Melt | 0.29 / * | W/(m K) |
| Specific Heat Capacity Melt | 2140 / * | J/(kg K) |
| Effective Thermal Diffusivity | 1.13E-7 / * | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 6.3 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.9 / * | % | Sim. to ISO 62 |
| Density | 1380 / - | kg/m³ | ISO 1183 |
Table 6 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.4 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 0.9 / * | % | ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
