Akulon® K224-G6-FC NA99001

Chemical Family: Polyamides

Akulon® K224-G6-FC NA99001 is a polyamide 6 (PA 6) resin labeled as food contact acceptable. This product possesses features like being lightweight and UL flame-rated. This is used in markets associated with automotive and transportation, as well as healthcare and pharma. End uses of this product are in door panels, flooring, and wheel housing parts.

Other characteristics

Brand: Akulon®
Polymer Name: Polyamide 6 (PA 6)
Fillers Included: Glass Fiber
Processing Methods: Injection Molding, Injection Molding
Reinforcement Material: Glass Fibers
Safety: For the safety properties of the material, we refer to our SDS which can be ordered at our sales offices. During practical operation we advise to wear personal safety protections for hand/eye/body.
Markets: Automotive & Transportation
Healthcare & Pharma
PACKAGING: Akulon® grades are supplied in airtight, moisture- proof packaging.
Flame Rating: UL 94 HB
Technology: Composite Materials
Plastics
Packaging Type: Bags
Boxes
Silos
Super Sacks
Labeling Claims: Food Contact Acceptable
Quality Standards: UL Yellow Card (E47960)
Material Features: Food Contact Acceptable
Light Weight
UL Flame Rated
Reinforcement Form: Tape
Unidirectional Fabric
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
UL 94
Composite Materials Functions: Resins Binders & Matrix Materials
Composites Processing Methods: Injection Molding
Plastics and Elastomers End Uses: Door Panel
Flooring
Wheel Housing Parts
Plastics and Elastomers Functions: Resin

Technical data

Table 1 of 8

9 rows

Characteristic	Value	Unit	Method
Tensile Modulus	9500 / 6000	MPa	ISO 527-1/-2
Stress at Break	180 / 110	MPa	ISO 527-1/-2
Strain at Break	3.5 / 7	%	ISO 527-1/-2
Flexural Modulus	8600 / -	MPa	ISO 178
Flexural Strength	235 / -	MPa	ISO 178
Charpy Impact Strength (at +23°C)	90 / 110	kJ/m²	ISO 179/1eU
Charpy Impact Strength (at -30°C)	75 / 75	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength (at +23°C)	12 / 25	kJ/m²	ISO 179/1eA
Charpy Notched Impact Strength (at -30°C)	11 / 11	kJ/m²	ISO 179/1eA

Table 2 of 8

14 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	220 / *	°C	ISO 11357-1/-3
Temperature of Deflection Under Load (1.80 MPa)	200 / *	°C	ISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)	220 / *	°C	ISO 75-1/-2
Coefficient of Linear Thermal Expansion (parallel)	0.2 / *	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.7 / *	E-4/°C	ISO 11359-1/-2
Burning Behaviour (at 1.5 mm Nominal Thickness)	UL HB / *	class	IEC 60695-11-10
Burning Behaviour (at 3.0 mm Nominal Thickness)	UL HB / *	class	IEC 60695-11-10
Burning Behaviour (at 0.75 mm Nominal Thickness)	HB / *	class	IEC 60695-11-10
Relative Temperature Index (Electrical, 0.75 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (Electrical, 3 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (with impact, 0.75 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (with impact, 3 / * mm)	65 / *	°C	UL746B

Table 3 of 8

8 rows

Characteristic	Value	Unit	Method
Relative Permittivity (100Hz)	3.5 / 20	—	IEC 62631-2-1
Relative Permittivity (1 MHz)	3.3 / 5	—	IEC 62631-2-1
Dissipation Factor (100 Hz)	50 / 3000	E-4	IEC 62631-2-1
Dissipation Factor (1 MHz)	150 / 1200	E-4	IEC 62631-2-1
Volume Resistivity	1E13 / 1E11	Ohm*m	IEC 62631-3-1
Surface Resistivity	- / 1E14	Ohm	IEC 62631-3-2
Electric Strength	30 / 25	kV/mm	IEC 60243-1
Comparative Tracking Index	- / 600	V	IEC 60112

Table 4 of 8

4 rows

Characteristic	Value	Unit
Density of Melt	1150 / *	kg/m³
Thermal Conductivity of Melt	0.27 / *	W/(m K)
Specific Heat Capacity Melt	2110 / *	J/(kg K)
Effective Thermal Diffusivity	1.12E-7 / *	m²/s

Table 5 of 8

3 rows

Characteristic	Value	Unit	Method
Water Absorption	6.3 / *	%	Sim. to ISO 62
Humidity Absorption	1.9 / *	%	Sim. to ISO 62
Density	1350 / -	kg/m³	ISO 1183

Table 6 of 8

1 row

Characteristic	Value	Method
Shore D Hardness (15s)	85 / *	ISO 868

Table 7 of 8