To catalogue
Akulon® Ultraflow XG-FKGS6/A
- Chemical Family
- Polyamides
Akulon® Ultraflow XG-FKGS6/A is a high-performance polyamide 6 and polyamide 66 material employed in a wide range of applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, it delivers an impressive combination of design flexibility and ease of processing, complemented by exceptional mechanical properties across a broad temperature range and diverse conditions. For extrusion, it establishes industry benchmarks, featuring remarkable strength, resilience, and ease of processing. The preferred processing technology for this product is injection molding.
Properties
- Physical Form
- Fabric
Product families
Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass/Mineral
- Additives Included
- Flame Retardant
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Plastics
- Labeling Claims
- Halogen-free
- Material Features
- Fast Crystallization
- Flame Retardant
- Good Mechanical Properties
- High Flow
- Light Weight
- Shorter Cycle Time
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Door Panel
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 10800 / - | MPa | ISO 527-1/-2 |
| Stress at Break | 130 / - | MPa | ISO 527-1/-2 |
| Strain at Break | 2.3 / - | % | ISO 527-1/-2 |
| Charpy Impact Strength (At +23°C) | 46 / - | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (At +23°C) | 8 / - | kJ/m² | ISO 179/1eA |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Burning Behavior (At 1.5/* mm Nominal Thickness) | UL V-0 | class | IEC 60695-11-10 |
| Burning Behavior (At 3.0/* mm Nominal Thickness) | UL V-0 | class | IEC 60695-11-10 |
| Burning Behavior (At 0.4/* mm Nominal Thickness) | V-0 | class | IEC 60695-11-10 |
| Burning Behavior (At 0.75/* mm Nominal Thickness) | V-0 | class | IEC 60695-11-10 |
Table 3 of 4
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1430 / - | kg/m³ | ISO 1183 |
Table 4 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume-Flow Rate (At 270/* °C, 5/* kg) | 24 / * | cm³/10min | ISO 1133 |
| Molding Shrinkage (Parallel) | 0.2 / * | % | Sim. to ISO 294-4 |
| Molding Shrinkage (Normal) | 0.6 / * | % | Sim. to ISO 294-4 |
