Stanyl® CR310
- Chemical Family
- Polyamides
Stanyl® CR310 stands as a high-performance polyamide, offering unparalleled performance and value for exacting applications requiring superior heat resistance, design stiffness, wear and friction qualities, and optimal process flow. This polyamide 46 finds utility in automotive, E&E, gear, and outdoor power equipment applications. Its exceptional heat resistance up to 220°C ensures it excels in high-performance scenarios, consistently outperforming PPA, PA6T, PA9T, and often PPS and LCP. Injection molding serves as the ideal processing technology, with added benefits of good to high flow and being phosphorus-free.
Product families
Applications
- Circuit Breakers
- Connectors
- Other Parts & Components
Product Families
- Polyamides
Other characteristics
- Brand
- Stanyl
- Polymer Name
- Polyamide 46 (PA 46)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 12500.0 - 12500.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Electrical & Electronics
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Halogen-free
- Phosphorus-free
- Quality Standards
- UL Yellow Card (E47960)
- Material Features
- Flame Retardant
- Heat Resistance
- High Flow
- UL Flame Rated
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Arc Chamber Application Data
Releasing of gasses which cool the arc rapidly; Stanyl® offers high thermomechanical withstandability; Stanyl® enables snap fitting; Stanyl® allows easier production and recyclable
- Plastics and Elastomers End Uses
- Arc Chamber
- Connectors
- Plastics and Elastomers Functions
- Resin
- WtB and BtB Connectors Application Data
Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high-heat resistance, a unique balance of high stiffness and good flowability and high strength and creep resistance levels leading to good pin retention. Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions to due good processability and high flowability enabling thin walled designs
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 12500 / 8000 | MPa | ISO 527-1/-2 |
| Stress at Break | 140 / 100 | MPa | ISO 527-1/-2 |
| Strain at Break | 1.7 / 2.5 | % | ISO 527-1/-2 |
| Flexural Modulus | 12500 / 8000 | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | 35 / 40 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 9 / 9 | kJ/m² | ISO 179/1eA |
Table 2 of 6
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 295 / * | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | 75 / * | °C | ISO 11357-1/-2 |
| Temperature of Deflection Under Load (1.80 MPa) | 290 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 290 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.35 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.45 / * | E-4/°C | ISO 11359-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL V-0 / * | class | IEC 60695-11-10 |
| Glow Wire Flammability Index (at thickness 3 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 0.75 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at thickness 3 / - mm) | 960 / - | °C | IEC 60695-2-13 |
| Glow Wire Ignition Temperature (at thickness 0.75 / - mm) | 960 / - | °C | IEC 60695-2-13 |
| Relative Temperature Index (Electrical, 0.75 / * mm) | 65 / * | °C | UL746B |
Table 3 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (1 MHz) | 4.1 / 4.9 | — | IEC 62631-2-1 |
| Relative Permittivity (1GHz) | 3.9 / 4.2 | — | IEC 60250 |
| Dissipation Factor (1 MHz) | 250 / 700 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1GHz) | 220 / 650 | E-4 | IEC 60250 |
| Volume Resistivity | >1E13 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / >1E15 | Ohm | IEC 62631-3-2 |
| Electric Strength | 33 / 31 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 425 / - | V | IEC 60112 |
Table 4 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Humidity Absorption | 1.8 / * | % | Sim. to ISO 62 |
| Density | 1530 / - | kg/m³ | ISO 1183 |
Table 5 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.4 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 1 / * | % | ISO 294-4 |
| Spiral Flow Length 1.0 mm 1000 bar | 160 / * | mm | — |
Химическая стойкость
377 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | resistant |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
