To catalogue
Xytron™ G4020DW-FC
- Chemical Family
- Polyphenylene Sulfide (PPS)
Xytron™ G4020DW-FC is a high-performance plastic compound from Envalior that is based on PPS (polyphenylene sulfide). It offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy, and high stiffness. Because of its outstanding properties, it contributes to excellent performance in many different applications. The product is of drinking water grade and is suitable for injection molding.
Product families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- Xytron
- Polymer Name
- Polyphenylene Sulfide (PPS)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 14000.0 - 14000.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Industrial
- Flame Rating
- UL 94 V0
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Food Contact Acceptable
- Quality Standards
- UL Yellow Card (E467723)
- Material Features
- Chemical Resistant
- Drinking Water Contact Acceptable
- Easier Processing
- Flame Retardant
- Food Contact Acceptable
- Good Strength
- Heat Resistance
- High Performance
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Pipe Fittings Application Data
Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiff and tough) and its better surface appearance than PA66; Stanyl® PA46 allows for more economical and reliable solutions than PES or PPSU also as a result of a very good creep resistance at elevated temperatures; Xytron™ PPS can provide super hydrolysis.
- Plastics and Elastomers End Uses
- Fittings
- Heaters
- Hydrogen Fuel Cells
- Hydrogen Pressure Vessel
- Pipes
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 6
29 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 15000 | MPa | ISO 527-1/-2 |
| Tensile Modulus (-40°C) | 17000 | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 9500 | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 5300 | MPa | ISO 527-1/-2 |
| Tensile Modulus (200°C) | 4100 | MPa | ISO 527-1/-2 |
| Stress at Break | 200 | MPa | ISO 527-1/-2 |
| Stress at Break (-40°C) | 235 | MPa | ISO 527-1/-2 |
| Stress at Break (120°C) | 100 | MPa | ISO 527-1/-2 |
| Stress at Break (160°C) | 65 | MPa | ISO 527-1/-2 |
| Stress at Break (200°C) | 50 | MPa | ISO 527-1/-2 |
| Strain at Break | 2 | % | ISO 527-1/-2 |
| Strain at Break (at -40°C) | 2 | % | ISO 527-1/-2 |
Table 2 of 6
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 280 | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | 90 | °C | ISO 11357-1/-2 |
| Temperature of Deflection Under Load (1.80 MPa) | 265 | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.15 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.4 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel, above Tg) | 0.15 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal, above Tg) | 1.1 | E-4/°C | ISO 11359-1/-2 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL V-0 | class | IEC 60695-11-10 |
| Relative Temperature Index (Electrical, 0.4 mm) | 130 | °C | UL746B |
| Relative Temperature Index (Electrical, 0.8 mm) | 130 | °C | UL746B |
| Relative Temperature Index (with impact, 0.4 mm) | 130 | °C | UL746B |
| Relative Temperature Index (with impact, 0.8 mm) | 130 | °C | UL746B |
Table 3 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (1GHz) | 4 | — | IEC 60250 |
| Relative Permittivity (5GHz) | 4 | — | IEC 60250 |
| Dissipation Factor (1GHz) | 35 | E-4 | IEC 60250 |
| Dissipation Factor (5GHz) | 55 | E-4 | IEC 60250 |
| Volume Resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | >1E15 | Ohm | IEC 62631-3-2 |
| Comparative Tracking Index | 150 | V | IEC 60112 |
| Dielectric Strength | 22 | kV/mm | IEC 60234 |
Table 4 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption in Water (at 23°C after 24h) | 0.04 | % | ISO 62 |
| Humidity Absorption | 0.04 | % | Sim. to ISO 62 |
| Density | 1650 | kg/m³ | ISO 1183 |
Table 5 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.2 | % | ISO 294-4 |
| Molding Shrinkage (normal) | 0.5 | % | ISO 294-4 |
Химическая стойкость
415 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | 1% nonylphenoxy-polyethyleneoxy ethanol in water at 23°C | resistant |
| Other | 50% Oleic acid + 50% Olive Oil at 23°C | resistant |
| Other | Acetaldehyde (40% by mass) at 23°C | resistant |
| Other | Acetamide (50% by mass) at 23°C | resistant |
| Other | Acetamide (50% by mass) at >140°C | resistant |
| Other | Acetic acid (10% by mass) at 100°C | resistant |
| Other | Acetic acid (10% by mass) at 23°C | resistant |
| Acids | Acetic Acid (5% by mass) at 23°C | resistant |
| Other | Acetic acid (95% by mass) at 23°C | resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | resistant |
