Xytron™ G3020DW-FC

Chemical Family: Polyphenylene Sulfide (PPS)

Xytron™ G3020DW-FC is a high-performance plastic compound from Envalior that is based on PPS (polyphenylene sulfide). It offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy, and high stiffness. Because of its outstanding properties, it contributes to excellent performance in many different applications. The product is of drinking water grade and is suitable for injection molding.

Product families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: Xytron
Polymer Name: Polyphenylene Sulfide (PPS)
Fillers Included: Glass Fiber
Flexural Modulus: 11000.0 - 11000.0 MPa
Processing Methods: Injection Molding
Markets: Building & Construction
Industrial
Technology: Plastics
Packaging Type: Bags
Boxes
Silos
Super Sacks
Labeling Claims: Food Contact Acceptable
Material Features: Chemical Resistant
Drinking Water Contact Acceptable
Flame Retardant
Food Contact Acceptable
Heat Resistance
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
Pipe Fittings Application Data: Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiff and tough) and its better surface appearance than PA66; Stanyl® PA46 allows for more economical and reliable solutions than PES or PPSU also as a result of a very good creep resistance at elevated temperatures; Xytron™ PPS can provide super hydrolysis.
Plastics and Elastomers End Uses: Fittings
Pipes
Plastics and Elastomers Functions: Resin
Grade Coding for Injection Molding: Xytron™ PPS reinforced injection molding grades.

Technical data

Table 1 of 6

25 rows

Characteristic	Value	Unit	Method
Tensile Modulus	11500	MPa	ISO 527-1/-2
Tensile Modulus (-40°C)	12300	MPa	ISO 527-1/-2
Tensile Modulus (120°C)	5600	MPa	ISO 527-1/-2
Tensile Modulus (160°C)	3600	MPa	ISO 527-1/-2
Tensile Modulus (200°C)	2800	MPa	ISO 527-1/-2
Stress at Break	175	MPa	ISO 527-1/-2
Stress at Break (-40°C)	200	MPa	ISO 527-1/-2
Stress at Break (120°C)	80	MPa	ISO 527-1/-2
Stress at Break (160°C)	65	MPa	ISO 527-1/-2
Stress at Break (200°C)	55	MPa	ISO 527-1/-2
Strain at Break	2.1	%	ISO 527-1/-2
Strain at Break (at -40°C)	2	%	ISO 527-1/-2

Table 2 of 6

7 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	280	°C	ISO 11357-1/-3
Glass Transition Temperature (at 10°C/min)	90	°C	ISO 11357-1/-2
Temperature of Deflection Under Load (1.80 MPa)	265	°C	ISO 75-1/-2
Coefficient of Linear Thermal Expansion (parallel)	0.18	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.5	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (parallel, above Tg)	0.18	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal, above Tg)	1.2	E-4/°C	ISO 11359-1/-2

Table 3 of 6

3 rows

Characteristic	Value	Unit	Method
Relative Permittivity (1 MHz)	3.7	—	IEC 62631-2-1
Dissipation Factor (1 MHz)	30	E-4	IEC 62631-2-1
Volume Resistivity	>1E13	Ohm*m	IEC 62631-3-1

Table 4 of 6

3 rows

Characteristic	Value	Unit	Method
Water Absorption in Water (at 23°C after 24h)	0.05	%	ISO 62
Humidity Absorption	0.05	%	Sim. to ISO 62
Density	1550	kg/m³	ISO 1183

Table 5 of 6

2 rows

Characteristic	Value	Unit	Method
Molding Shrinkage (parallel)	0.2	%	ISO 294-4
Molding Shrinkage (normal)	0.65	%	ISO 294-4

Химическая стойкость

415 rows

Characteristic	Value	Unit
Other	1% nonylphenoxy-polyethyleneoxy ethanol in water at 23°C	resistant
Other	50% Oleic acid + 50% Olive Oil at 23°C	resistant
Other	Acetaldehyde (40% by mass) at 23°C	resistant
Other	Acetamide (50% by mass) at 23°C	resistant
Other	Acetamide (50% by mass) at >140°C	resistant
Other	Acetic acid (10% by mass) at 100°C	resistant
Other	Acetic acid (10% by mass) at 23°C	resistant
Acids	Acetic Acid (5% by mass) at 23°C	resistant
Other	Acetic acid (95% by mass) at 23°C	resistant
Ketones	Acetone at 23°C	resistant
Other	Acetophenone at 23°C	resistant
Other	Acetyl chloride at 23°C	resistant