To catalogue
Xytron™ G4080HR
- Chemical Family
- Polyphenylene Sulfide (PPS)
Xytron™ G4080HR is a high-performance plastic compound is based on PPS (polyphenylene sulfide). It offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy, and high stiffness. Because of its outstanding properties, it contributes to excellent performance in many different applications. A suitable processing technology for the product is injection molding. Special features include hydrolysis resistance or enhanced hydrolytic stability.
Product families
Applications
Automotive & Transportation — Automotive
- Cooling & Climate
- Fuel Systems
- Powertrain & UTH
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- Xytron
- Polymer Name
- Polyphenylene Sulfide (PPS)
- Fillers Included
- Glass Fiber
- Flexural Modulus
- 14000.0 - 14000.0 MPa
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Chemical Resistant
- Flame Retardant
- Heat Resistance
- Hydrolysis Resistant
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Plastics and Elastomers End Uses
- Hydrogen Fuel Cells
- Thermal Management
- Water Pumps
- Plastics and Elastomers Functions
- Resin
- Grade Coding for Injection Molding
- Xytron™ PPS reinforced injection molding grades.
- Hydrogen Fuel Cells Application Data
Lowest ion leaching of its kind, up to 120°C; Best strength and toughness retention in hydrolytic environment; Best dimensional stability, fatigue and creep resistance; Best weldline strength before and after hydrolytic and heat aging
Technical data
Table 1 of 6
34 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 15000 | MPa | ISO 527-1/-2 |
| Tensile Modulus (-40°C) | 15000 | MPa | ISO 527-1/-2 |
| Tensile Modulus (120°C) | 6300 | MPa | ISO 527-1/-2 |
| Tensile Modulus (160°C) | 4400 | MPa | ISO 527-1/-2 |
| Tensile Modulus (200°C) | 3500 | MPa | ISO 527-1/-2 |
| Stress at Break | 190 | MPa | ISO 527-1/-2 |
| Stress at Break (-40°C) | 240 | MPa | ISO 527-1/-2 |
| Stress at Break (120°C) | 85 | MPa | ISO 527-1/-2 |
| Stress at Break (160°C) | 62 | MPa | ISO 527-1/-2 |
| Stress at Break (200°C) | 50 | MPa | ISO 527-1/-2 |
| Strain at Break | 2 | % | ISO 527-1/-2 |
| Strain at Break (at -40°C) | 2 | % | ISO 527-1/-2 |
Table 2 of 6
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 280 | °C | ISO 11357-1/-3 |
| Glass Transition Temperature (at 10°C/min) | 90 | °C | ISO 11357-1/-2 |
| Temperature of Deflection Under Load (1.80 MPa) | 265 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 280 | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (8.00 MPa) | 185 | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.15 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.4 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel, above Tg) | 0.15 | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal, above Tg) | 1.1 | E-4/°C | ISO 11359-1/-2 |
Table 3 of 6
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (1GHz) | 4 | — | IEC 60250 |
| Relative Permittivity (5GHz) | 4 | — | IEC 60250 |
| Dissipation Factor (1GHz) | 35 | E-4 | IEC 60250 |
| Dissipation Factor (5GHz) | 55 | E-4 | IEC 60250 |
| Volume Resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | >1E15 | Ohm | IEC 62631-3-2 |
| Electric Strength | 31 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 175 | V | IEC 60112 |
Table 4 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption in Water (at 23°C after 24h) | 0.04 | % | ISO 62 |
| Humidity Absorption | 0.04 | % | Sim. to ISO 62 |
| Density | 1650 | kg/m³ | ISO 1183 |
Table 5 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.2 | % | ISO 294-4 |
| Molding Shrinkage (normal) | 0.5 | % | ISO 294-4 |
Химическая стойкость
416 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | 1% nonylphenoxy-polyethyleneoxy ethanol in water at 23°C | resistant |
| Other | 50% Oleic acid + 50% Olive Oil at 23°C | resistant |
| Other | Acetaldehyde (40% by mass) at 23°C | resistant |
| Other | Acetamide (50% by mass) at 23°C | resistant |
| Other | Acetamide (50% by mass) at >140°C | resistant |
| Other | Acetic acid (10% by mass) at 100°C | resistant |
| Other | Acetic acid (10% by mass) at 23°C | resistant |
| Acids | Acetic Acid (5% by mass) at 23°C | resistant |
| Other | Acetic acid (95% by mass) at 23°C | resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | resistant |
