Xytron™ G4010W

Chemical Family: Polyphenylene Sulfide (PPS)

Xytron™ G4010W is a high-performance plastic compound from Envalior that is based on PPS (polyphenylene sulfide). It offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy, and high stiffness. Because of its outstanding properties, it contributes to excellent performance in many different applications. A suitable processing technology for the product is injection molding. Special features include wear and friction modification.

Product families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Other characteristics

Brand: Xytron
Polymer Name: Polyphenylene Sulfide (PPS)
Fillers Included: Glass Fiber
Flexural Modulus: 14500.0 - 14500.0 MPa
Processing Methods: Injection Molding
Markets: Automotive & Transportation
Consumer Goods
Electrical & Electronics
Industrial
Flame Rating: UL 94 V0
Technology: Plastics
Packaging Type: Bags
Boxes
Silos
Super Sacks
Quality Standards: UL Yellow Card (E467723)
Material Features: Chemical Resistant
Flame Retardant
Heat Resistance
Low Friction
Low Wear
UL Flame Rated
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
UL 94
Plastics and Elastomers End Uses: Pipes
Pump Parts
Plastics and Elastomers Functions: Resin
Grade Coding for Injection Molding: Xytron™ PPS reinforced injection molding grades.

Technical data

Table 1 of 6

27 rows

Characteristic	Value	Unit	Method
Tensile Modulus	15000	MPa	ISO 527-1/-2
Tensile Modulus (-40°C)	15500	MPa	ISO 527-1/-2
Tensile Modulus (120°C)	7500	MPa	ISO 527-1/-2
Tensile Modulus (160°C)	5500	MPa	ISO 527-1/-2
Stress at Break	200	MPa	ISO 527-1/-2
Stress at Break (-40°C)	245	MPa	ISO 527-1/-2
Stress at Break (120°C)	86	MPa	ISO 527-1/-2
Stress at Break (160°C)	65	MPa	ISO 527-1/-2
Strain at Break	2	%	ISO 527-1/-2
Strain at Break (at -40°C)	2.2	%	ISO 527-1/-2
Strain at Break (at 120°C)	3.5	%	ISO 527-1/-2
Strain at Break (at 160°C)	4	%	ISO 527-1/-2

Table 2 of 6

15 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	280	°C	ISO 11357-1/-3
Glass Transition Temperature (at 10°C/min)	90	°C	ISO 11357-1/-2
Temperature of Deflection Under Load (1.80 MPa)	265	°C	ISO 75-1/-2
Coefficient of Linear Thermal Expansion (parallel)	0.15	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.4	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (parallel, above Tg)	0.15	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal, above Tg)	1.1	E-4/°C	ISO 11359-1/-2
Burning Behaviour (at 1.5 mm Nominal Thickness)	UL V-0	class	IEC 60695-11-10
Burning Behaviour (at 3.0 mm Nominal Thickness)	UL V-0	class	IEC 60695-11-10
Relative Temperature Index (Electrical, 0.4 mm)	130	°C	UL746B
Relative Temperature Index (Electrical, 3 mm)	130	°C	UL746B
Relative Temperature Index (with impact, 0.4 mm)	130	°C	UL746B

Table 3 of 6

3 rows

Characteristic	Value	Unit	Method
Volume Resistivity	>1E13	Ohm*m	IEC 62631-3-1
Surface Resistivity	>1E15	Ohm	IEC 62631-3-2
Comparative Tracking Index	175	V	IEC 60112

Table 4 of 6

3 rows

Characteristic	Value	Unit	Method
Water Absorption in Water (at 23°C after 24h)	0.04	%	ISO 62
Humidity Absorption	0.04	%	Sim. to ISO 62
Density	1740	kg/m³	ISO 1183

Table 5 of 6

2 rows

Characteristic	Value	Unit	Method
Molding Shrinkage (parallel)	0.2	%	ISO 294-4
Molding Shrinkage (normal)	0.5	%	ISO 294-4

Химическая стойкость

415 rows

Characteristic	Value	Unit
Other	1% nonylphenoxy-polyethyleneoxy ethanol in water at 23°C	resistant
Other	50% Oleic acid + 50% Olive Oil at 23°C	resistant
Other	Acetaldehyde (40% by mass) at 23°C	resistant
Other	Acetamide (50% by mass) at 23°C	resistant
Other	Acetamide (50% by mass) at >140°C	resistant
Other	Acetic acid (10% by mass) at 100°C	resistant
Other	Acetic acid (10% by mass) at 23°C	resistant
Acids	Acetic Acid (5% by mass) at 23°C	resistant
Other	Acetic acid (95% by mass) at 23°C	resistant
Ketones	Acetone at 23°C	resistant
Other	Acetophenone at 23°C	resistant
Other	Acetyl chloride at 23°C	resistant