Akulon® S223-G6-FC BK00001

Chemical Family: Polyamides

Akulon® S223-G6-FC BK00001 is a high-performance material that combines the attributes of polyamide 6 and polyamide 66. It is widely used by customers worldwide in a variety of applications, including automotive, electronics, electrical, furniture, and packaging. When employed in molded parts, this material excels in providing an outstanding balance between ease of design and processing, all while delivering exceptional mechanical properties across a wide temperature range and under diverse conditions.

Other characteristics

Brand: Akulon®
Polymer Name: Polyamide 66 (PA 66), Polyamide Copolymer
Polyamide 66 (PA 66)
Polyamide Copolymer
Fillers Included: Glass Fiber
Processing Methods: Injection Molding, Injection Molding
Reinforcement Material: Glass Fibers
Markets: Automotive & Transportation
Consumer Goods
Technology: Composite Materials
Plastics
Packaging Type: Bags
Boxes
Silos
Super Sacks
Labeling Claims: Food Contact Acceptable
Material Features: Food Contact Acceptable
Light Weight
Reinforcement Form: Tape
Unidirectional Fabric
Certifications and Compliance: ISO 14001
OHSAS
REACH (Europe)
Composite Materials Functions: Resins Binders & Matrix Materials
Composites Processing Methods: Injection Molding
Plastics and Elastomers End Uses: Door Panel
Flooring
Kitchenware
Wheel Housing Parts
Plastics and Elastomers Functions: Resin

Technical data

Table 1 of 7

9 rows

Characteristic	Value	Unit	Method
Tensile Modulus	9500 / 7500	MPa	ISO 527-1/-2
Stress at Break	190 / 140	MPa	ISO 527-1/-2
Strain at Break	3 / 5	%	ISO 527-1/-2
Flexural Modulus	8400 / -	MPa	ISO 178
Flexural Strength	250 / -	MPa	ISO 178
Charpy Impact Strength (at +23°C)	80 / 100	kJ/m²	ISO 179/1eU
Charpy Impact Strength (at -30°C)	70 / 70	kJ/m²	ISO 179/1eU
Charpy Notched Impact Strength (at +23°C)	12 / 20	kJ/m²	ISO 179/1eA
Charpy Notched Impact Strength (at -30°C)	10 / 10	kJ/m²	ISO 179/1eA

Table 2 of 7

11 rows

Characteristic	Value	Unit	Method
Melting Temperature (10°C/min)	260 / *	°C	ISO 11357-1/-3
Temperature of Deflection Under Load (1.80 MPa)	245 / *	°C	ISO 75-1/-2
Temperature of Deflection Under Load (0.45 MPa)	260 / *	°C	ISO 75-1/-2
Coefficient of Linear Thermal Expansion (parallel)	0.2 / *	E-4/°C	ISO 11359-1/-2
Coefficient of Linear Thermal Expansion (normal)	0.7 / *	E-4/°C	ISO 11359-1/-2
Relative Temperature Index (Electrical, 0.71 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (Electrical, 3 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (with impact, 0.71 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (with impact, 3 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (without impact, 0.71 / * mm)	65 / *	°C	UL746B
Relative Temperature Index (without impact, 3 / * mm)	65 / *	°C	UL746B

Table 3 of 7

8 rows

Characteristic	Value	Unit	Method
Relative Permittivity (100Hz)	3.8 / 11	—	IEC 62631-2-1
Relative Permittivity (1 MHz)	3.5 / 4.6	—	IEC 62631-2-1
Dissipation Factor (100 Hz)	90 / 1400	E-4	IEC 62631-2-1
Dissipation Factor (1 MHz)	160 / 1000	E-4	IEC 62631-2-1
Volume Resistivity	1E13 / 1E11	Ohm*m	IEC 62631-3-1
Surface Resistivity	- / 1E14	Ohm	IEC 62631-3-2
Electric Strength	30 / 25	kV/mm	IEC 60243-1
Comparative Tracking Index	600 / 600	V	IEC 60112

Table 4 of 7

2 rows

Characteristic	Value	Unit
Thermal Conductivity of Melt	0.172 / *	W/(m K)
Specific Heat Capacity Melt	2170 / *	J/(kg K)

Table 5 of 7

3 rows

Characteristic	Value	Unit	Method
Water Absorption	6 / *	%	Sim. to ISO 62
Humidity Absorption	1.6 / *	%	Sim. to ISO 62
Density	1360 / -	kg/m³	ISO 1183

Table 6 of 7