Akulon® Ultraflow K-FHGM35
- Chemical Family
- Polyamides
Akulon® Ultraflow K-FHGM35 is a high-performance polyamide 6 and polyamide 66 material trusted globally across a spectrum of applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, it excels in delivering an impressive combination of design flexibility and ease of processing, alongside exceptional mechanical properties over a broad temperature range and diverse conditions. For extrusion, it establishes industry benchmarks with its exceptional strength, resilience, and ease of processing. Injection molding is the preferred method, and key features encompass 15% glass reinforcement, 25% mineral reinforcement, heat stabilization, and high flow capabilities.
Product families
Applications
- Exterior & Body
- Interior
Product Families
- Polyamides
- Thermoplastic Resins
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber, Mineral
- Glass Fiber
- Mineral
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers, Mineral
- Glass Fibers
- Mineral
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Plastics
- OEM Standards
- Chrysler
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Heat Stabilized
- High Flow
- Light Weight
- OEM Specifications
- CHRYSLER MS-50017 CPN2755
- CHRYSLER MS-50017 CPN3441
- CHRYSLER MS-50017 CPN4759
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Roof Racks Application Data
Akulon® PA6 allows for light weight solutions as compared to metal; Akulon® PA6 allows for reliable solutions due to high weldline performance and temperature resistance (better than PP) and to its great surface appearance (better than PA66) and UV resistance (in case of L-stabilized grades); Akulon® PA6 allows for cost effective solutions as compared to PA66; Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Door Panel
- Flooring
- Roof Racks
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 9000 / 6000 | MPa | ISO 527-1/-2 |
| Stress at Break | 120 / 65 | MPa | ISO 527-1/-2 |
| Strain at Break | 2.5 / 5 | % | ISO 527-1/-2 |
| Flexural Modulus | 7700 / - | MPa | ISO 178 |
| Flexural Strength | 165 / - | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | 35 / 45 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | 30 / 30 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 5 / 6 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | 4 / 4 | kJ/m² | ISO 179/1eA |
Table 2 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 205 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 215 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.35 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.5 / * | E-4/°C | ISO 11359-1/-2 |
Table 3 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.5 / 14 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.3 / 4.5 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 50 / 3200 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 140 / 1200 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E12 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E13 | Ohm | IEC 62631-3-2 |
| Electric Strength | 35 / 30 | kV/mm | IEC 60243-1 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1290 / * | kg/m³ |
| Thermal Conductivity of Melt | 0.38 / * | W/(m K) |
| Specific Heat Capacity Melt | 2140 / * | J/(kg K) |
| Effective Thermal Diffusivity | 1.37E-7 / * | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 5.5 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.7 / * | % | Sim. to ISO 62 |
| Density | 1500 / - | kg/m³ | ISO 1183 |
Table 6 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.3 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 0.9 / * | % | ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
