To catalogue
Akulon® Ultraflow K-FKMV5
- Chemical Family
- Polyamides
Akulon® Ultraflow K-FKMV5 represents a versatile family of high-performance polyamide 6 and polyamide 66 materials trusted worldwide for diverse applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, these materials deliver an impressive blend of design flexibility and ease of processing, complemented by exceptional mechanical properties across a broad temperature range and diverse conditions. For extrusion, they establish industry standards, boasting notable strength, resilience, and ease of processing. Injection molding is the preferred method, and key attributes encompass good or high flow characteristics.
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Mineral
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Mineral
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Flame Rating
- UL 94 V2
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Halogen-free
- Quality Standards
- UL Yellow Card (E47960)
- Material Features
- Flame Retardant
- High Flow
- High Performance
- Light Weight
- UL Flame Rated
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Door Panel
- Flooring
- Molded Case Circuit Breakers
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 6200 / 2500 | MPa | ISO 527-1/-2 |
| Stress at Break | 65 / 35 | MPa | ISO 527-1/-2 |
| Strain at Break | 2 / 25 | % | ISO 527-1/-2 |
| Flexural Modulus | 6500 / - | MPa | ISO 178 |
| Flexural Strength | 115 / - | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | 25 / 30 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | 25 / - | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 2 / 2 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | 2 / - | kJ/m² | ISO 179/1eA |
Table 2 of 7
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 110 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 205 / * | °C | ISO 75-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL V-2 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL V-2 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 0.75 mm Nominal Thickness) | V-2 / * | class | IEC 60695-11-10 |
| Glow Wire Flammability Index (at thickness 1.5 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 3 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (at thickness 1.5 / - mm) | 725 / - | °C | IEC 60695-2-13 |
| Relative Temperature Index (Electrical, 0.75 / * mm) | 65 / * | °C | UL746B |
| Relative Temperature Index (Electrical, 3 / * mm) | 65 / * | °C | UL746B |
| Relative Temperature Index (with impact, 0.75 / * mm) | 65 / * | °C | UL746B |
Table 3 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | min. 1E13 / - | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / >1E15 | Ohm | IEC 62631-3-2 |
| Comparative Tracking Index | - / 600 | V | IEC 60112 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1170 / * | kg/m³ |
| Thermal Conductivity of Melt | 0.201 / * | W/(m K) |
| Specific Heat Capacity Melt | 2250 / * | J/(kg K) |
| Effective Thermal Diffusivity | 7.63E-8 / * | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 6.2 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.8 / * | % | Sim. to ISO 62 |
| Density | 1380 / - | kg/m³ | ISO 1183 |
Table 6 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume-Flow Rate (at 250 / * °C, 2.16 / * kg) | 25 / * | cm³/10min | ISO 1133 |
| Molding Shrinkage (parallel) | 0.6 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 0.8 / * | % | ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
