To catalogue
Akulon® Ultraflow K-FKG6U GY9996
- Chemical Family
- Polyamides
Akulon® Ultraflow K-FKG6U GY9996 is a high-performance polyamide 6 and polyamide 66 material trusted globally for diverse applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, it delivers an impressive combination of design simplicity and processing ease, alongside outstanding mechanical properties over a broad temperature range and diverse conditions. For extrusion, it sets industry standards, featuring remarkable strength, resilience, and ease of processing. Injection molding is the preferred method, and key attributes include 33% glass reinforcement, heat stabilization, and high flow characteristics.
Product families
Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- Heat Stabilized
- High Flow
- Light Weight
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Door Panel
- Flooring
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 4
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 10500 / 6500 | MPa | ISO 527-1/-2 |
| Stress at Break | 170 / 120 | MPa | ISO 527-1/-2 |
| Strain at Break | 3 / 5 | % | ISO 527-1/-2 |
| Flexural Modulus | 9100 / - | MPa | ISO 178 |
| Charpy Notched Impact Strength (at +23°C) | 9.5 / - | kJ/m² | ISO 179/1eA |
| Izod Notched Impact Strength (at +23°C) | 9.5 / - | kJ/m² | ISO 180/1A |
Table 2 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 210 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 220 / * | °C | ISO 75-1/-2 |
Table 3 of 4
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 5.8 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.65 / * | % | Sim. to ISO 62 |
| Density | 1390 / - | kg/m³ | ISO 1183 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
