To catalogue
Akulon® Ultraflow K-FG5
- Chemical Family
- Polyamides
Akulon® Ultraflow K-FG5 is a high-performance polyamide 6 and polyamide 66 material trusted by global customers for various applications, including automotive, electronics, electrical, furniture, and packaging. In molded parts, it strikes an exceptional balance between design flexibility and ease of processing, offering impressive mechanical properties across a broad temperature range and diverse conditions. For extrusion, it establishes industry-leading standards with its exceptional strength, resilience, and ease of processing. The preferred processing technology is injection molding, and notable features include 25% glass reinforcement and high flow capabilities.
Product families
Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Composite Materials — Polymers & Resins
- Thermoplastic Resins
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Plastics
- OEM Standards
- Mercedes
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Material Features
- High Flow
- Light Weight
- OEM Specifications
- MERCEDES DBL 5410
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
- Plastics and Elastomers End Uses
- Door Panel
- Flooring
- Wheel Housing Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 8150 / - | MPa | ISO 527-1/-2 |
| Stress at Break | 150 / - | MPa | ISO 527-1/-2 |
| Strain at Break | 3.3 / - | % | ISO 527-1/-2 |
| Charpy Impact Strength (at +23°C) | 80 / - | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | 40 / - | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 10 / - | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | 8 / - | kJ/m² | ISO 179/1eA |
Table 2 of 7
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 195 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 215 / * | °C | ISO 75-1/-2 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.2 / * | E-4/°C | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (normal) | 0.7 / * | E-4/°C | ISO 11359-1/-2 |
Table 3 of 7
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 3.5 / 14 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.3 / 5 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 50 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 150 / 1200 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E13 / 1E11 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E14 | Ohm | IEC 62631-3-2 |
| Comparative Tracking Index | - / 600 | V | IEC 60112 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1130 / * | kg/m³ |
| Thermal Conductivity of Melt | 0.26 / * | W/(m K) |
| Specific Heat Capacity Melt | 2260 / * | J/(kg K) |
| Effective Thermal Diffusivity | 1.02E-7 / * | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 6.8 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 1.8 / * | % | Sim. to ISO 62 |
| Density | 1300 / - | kg/m³ | ISO 1183 |
Table 6 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.3 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 1.1 / * | % | ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
