Release W40 GB1
- CASE Ingredients Functions
- Release Agent
- Chemical Family
- Acrylics & Acrylates
RELEASE W 40 GB1 is a water-based release agent based on acrylic polymers added with special releasing agents.
Product families
- Functional Additives
Other characteristics
- Brand
- Release
- End Uses
- Hot Melt Adhesive, Solventborne Adhesive
- Functions
- Release Agent
- Carrier
- Water
- Markets
- Adhesives & Sealants
- Storing
Keep material at temperatures between +5°C and +40°C; avoid direct sunlight/freezing. When stored for more than one month, it becomes necessary to stir the product slowly for 10 - 15 minutes before use.
- Handling
Coating methods: Mayer bar, Reverse Roll, Roto-gravure, Air knife. The quantity to apply depends on the substrate porosity, normally ranging from 1 to 3 g dry/sqm. The product can be either thickened (acrylic thickeners) or diluted (water). In order to obtain the highest releasing properties, we recommend to heat the product at 150°C for a few seconds. A self-curing process is triggered after the drying. Aging properties of the film are excellent.
- Shelf LIfe
- 1 Month
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Technology
- CASE Ingredients
- Adhesive & Sealant Type
- Hot Melt Adhesive
- Solventborne Adhesive
- Compatible Substrates and Surfaces
- Paper
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Total Solids | 40±1 | % |
| Solvents | water | — |
| pH | 8 - 9 | — |
| Brookfield Viscosity 25°C | 800 - 1,2001 | mPa.s |
