Akulon® K222-KGV4
- Chemical Family
- Polyamides
Akulon® K222-KGV4 is a polyamide 6 (PA 6) resin that comes with labeling claims of being halogen-free and phosphorus-free. They feature flame-retardant and heat-stabilized properties, making them suitable for applications in automotive and transportation as well as electrical and electronics markets. Additionally, they are known for their light weight and UL flame rating.
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Additives Included
- Heat Stabilizer
- Processing Methods
- Injection Molding, Injection Molding
- Reinforcement Material
- Glass Fibers
- Safety
For the safety properties of the material, we refer to our SDS which can be ordered at our sales offices. During practical operation we advise to wear personal safety protections for hand/eye/body.
- Markets
- Automotive & Transportation
- Electrical & Electronics
- PACKAGING
Akulon® grades are supplied in airtight, moisture- proof packaging.
- Flame Rating
- UL 94 V2
- Technology
- Composite Materials
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Halogen-free
- Phosphorus-free
- Quality Standards
- UL Yellow Card (E43392)
- UL Yellow Card (E47960)
- Material Features
- Flame Retardant
- Heat Stabilized
- Light Weight
- UL Flame Rated
- Reinforcement Form
- Tape
- Unidirectional Fabric
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- UL 94
- Contactors Application Data
Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance. Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses
- Fuse Holder Application Data
ForTii® allows the Fuse holder to withstand high temperatures and the material has a high impact resistance; Productivity improvement; Laser printing; Snap fitting; DIN rail mounting
- Switch Base Application Data
- Improved chemical resistance
- Avoidance of stress cracking
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Injection Molding
Technical data
Table 1 of 7
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 6000 / 2500 | MPa | ISO 527-1/-2 |
| Stress at Break | 85 / 45 | MPa | ISO 527-1/-2 |
| Strain at Break | 3.6 / 15 | % | ISO 527-1/-2 |
| Flexural Modulus | 5700 / 2500 | MPa | ISO 178 |
| Flexural Strength | 140 / 65 | MPa | ISO 178 |
| Charpy Impact Strength (at +23°C) | 45 / 110 | kJ/m² | ISO 179/1eU |
| Charpy Impact Strength (at -30°C) | 35 / 35 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength (at +23°C) | 3.5 / 7 | kJ/m² | ISO 179/1eA |
| Charpy Notched Impact Strength (at -30°C) | 3 / 3 | kJ/m² | ISO 179/1eA |
Table 2 of 7
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 / * | °C | ISO 11357-1/-3 |
| Temperature of Deflection Under Load (1.80 MPa) | 140 / * | °C | ISO 75-1/-2 |
| Temperature of Deflection Under Load (0.45 MPa) | 210 / * | °C | ISO 75-1/-2 |
| Burning Behaviour (at 1.5 mm Nominal Thickness) | UL V-2 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 3.0 mm Nominal Thickness) | UL V-2 / * | class | IEC 60695-11-10 |
| Burning Behaviour (at 0.75 mm Nominal Thickness) | V-2 / * | class | IEC 60695-11-10 |
| Glow Wire Flammability Index (at thickness 1.6 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Glow Wire Flammability Index (at thickness 1 / - mm) | 960 / - | °C | IEC 60695-2-12 |
| Relative Temperature Index (Electrical, 0.8 / * mm) | 140 / * | °C | UL746B |
| Relative Temperature Index (Electrical, 3 / * mm) | 140 / * | °C | UL746B |
| Relative Temperature Index (without impact, 0.8 / * mm) | 130 / * | °C | UL746B |
| Relative Temperature Index (without impact, 3 / * mm) | 130 / * | °C | UL746B |
Table 3 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Relative Permittivity (100Hz) | 4.3 / 10 | — | IEC 62631-2-1 |
| Relative Permittivity (1 MHz) | 3.8 / 3.9 | — | IEC 62631-2-1 |
| Dissipation Factor (100 Hz) | 130 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1 MHz) | 210 / 1000 | E-4 | IEC 62631-2-1 |
| Volume Resistivity | 1E13 / 1E11 | Ohm*m | IEC 62631-3-1 |
| Surface Resistivity | - / 1E14 | Ohm | IEC 62631-3-2 |
| Electric Strength | 30 / 25 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 / 600 | V | IEC 60112 |
Table 4 of 7
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Density of Melt | 1030 / * | kg/m³ |
| Thermal Conductivity of Melt | 0.29 / * | W/(m K) |
| Specific Heat Capacity Melt | 2270 / * | J/(kg K) |
| Effective Thermal Diffusivity | 1.25E-7 / * | m²/s |
Table 5 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 6.5 / * | % | Sim. to ISO 62 |
| Humidity Absorption | 2 / * | % | Sim. to ISO 62 |
| Density | 1340 / - | kg/m³ | ISO 1183 |
Table 6 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Molding Shrinkage (parallel) | 0.6 / * | % | ISO 294-4 |
| Molding Shrinkage (normal) | 1 / * | % | ISO 294-4 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
