Akulon® F130-C1
- Chemical Family
- Polyamides
Akulon® F130-C1 is a polyamide 6 (PA 6) that functions as a resin that is suitable for food contact applications and is also lubricated. It possesses medium viscosity and is commonly applied in the food and beverage packaging industry. This versatile material is used for various end applications, including biaxially oriented film, film, and oriented film.
Product families
Applications
- Food & Beverage Packaging
Product Families
- Polyamides
Other characteristics
- Brand
- Akulon®
- Polymer Name
- Polyamide 6 (PA 6)
- Additives Included
- Lubricant (Unspecified)
- Processing Methods
- Extrusion, Film Extrusion
- Markets
- Printing & Packaging
- Technology
- Plastics
- Packaging Type
- Bags
- Boxes
- Silos
- Super Sacks
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Food Contact Acceptable
- Lubricated
- Medium Viscosity
- Certifications and Compliance
- ISO 14001
- OHSAS
- REACH (Europe)
- Plastics and Elastomers End Uses
- Biaxially Oriented Film
- Film
- Oriented Film
- Packaging For Sterilized Surgical Devices
- Pharmaceutical Packaging
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
- Film Extrusion
- Packaging For Sterilized Surgical Devices Application Data
Akulon® PA6 F130-C LOPA allows for very cost effective solutions since it yields very low oligomer content vs. standard Polyamides which significantly reduces lactam pollution in film production, leading to less cleaning stops. Akulon® PA6 allows for reliable solutions due to its good barrier performance, high temperature sterilization resistance, puncture resistance & mechanical performance, food contact and USP capable, resistance to lipids & carrier solutions and good transparency
- Application Data
Akulon® PA6 has an outstanding mechanical strength; Akulon® has good oxygen barrier properties
Technical data
Table 1 of 7
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melting Temperature (10°C/min) | 220 | °C | ISO 11357-1/-3 |
| Coefficient of Linear Thermal Expansion (parallel) | 0.9 | E-4/°C | ISO 11359-1/-2 |
Table 2 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity Number | 196 | cm³/g | ISO 307, 1157, 1628 |
| RSV Formic Acid (1g/100ml) | 3.03 | — | DSM method |
| Melt Viscosity (at 260°C) | 810 | Pa s | DSM method |
Table 3 of 7
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Heat Capacity | 1550 | J/(kg K) |
| Average Specific Heat Capacity (at 20-150°C) | 2250 | J/(kg K) |
Table 4 of 7
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Water Absorption | 9 | % | Sim. to ISO 62 |
| Humidity Absorption | 2.8 | % | Sim. to ISO 62 |
| Density | 1130 | kg/m³ | ISO 1183 |
Table 5 of 7
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Modulus of Elasticity (50 mm/min) | 455 | MPa | DSM-Method |
| Stress at Yield (parallel) | 31 | MPa | ISO 527-3 |
| Maximum Stress (parallel) | 82 | MPa | ISO 527-3 |
| Maximum Strain (parallel) | 350 | % | ISO 527-3 |
| Trouser Tear Resistance (parallel) | 32 | — | ISO 6383-1 |
| Puncture Resistance | 1300 | J/m | DSM-Method |
| Static Coefficient of Friction | 1.2 | — | ISO 8295 |
| Dynamic Coefficient of Friction | 1 | — | ISO 8295 |
Table 6 of 7
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Transparency/Clarity | 83 | % | DSM method |
| Oxygen Transmission Rate (at 23°C/0%r.h.) | 26 | cm³/(m²*d*bar) | DIS 15105-1/-2 |
| Oxygen Transmission Rate (at 23°C/85%r.h) | 38 | cm³/(m²*d*bar) | DIS 15105-1/-2 |
| Water Vapor Transmission Rate (at 23°C/85%r.h.) | 35 | g/(m²*d) | DIS 15106-1/-3 |
Химическая стойкость
385 rows| Characteristic | Value | Unit |
|---|---|---|
| Other | Acetaldehyde (40% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetamide (50% by mass) at >140°C | not resistant |
| Other | Acetic acid (10% by mass) at 100°C | not resistant |
| Other | Acetic acid (10% by mass) at 23°C | limited resistant, tests necessary to verify |
| Other | Acetic acid (95% by mass) at 23°C | not resistant |
| Ketones | Acetone at 23°C | resistant |
| Other | Acetophenone at 23°C | resistant |
| Other | Acetyl chloride at 23°C | not resistant |
| Other | Acetylene at 23°C | resistant |
| Other | Acrylic acid at 23°C | not resistant |
| Other | Aliphatic amines at 23°C | resistant |
