LIOPUR PFL 1154
- CASE Ingredients Functions
- Binder & Resin
- Chemical Family
- Polyurethanes (PU)
LIOPUR PFL 1154 is an aqueous, aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. After air-drying, film coatings based on this one are transparent films that are tack-free and exhibit good surface hardness. It has applications in furniture coatings, architectural coatings, wood coatings and finishes, and industrial coatings.
Properties
- Physical Form
- Dispersion
Product families
Applications
- Consumer Goods — Furniture
- Architectural Coatings
- Wood Coatings & Finishes
- Architectural Coatings
- Wood Flooring
- Furniture Coatings
- Industrial Coatings
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- LIOPUR
- End Uses
- 2K (2 component) Coating
- Compatible Substrates & Surfaces
- Plastics, Wood
- Carrier
- Water
- Markets
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Storage
LIOPUR PFL 1154 has the dispersion which should be stored in tightly sealed containers in a frost-free place. It contains preservative.. LIOPUR PFL 1154 has the the dispersion which should be stored in tightly sealed containers in a frost-free place. It contains preservative.
- Appearance
- Transparent to slightly colloidal
- Cure
- Chemical Cure
- Supplied As
- 35%ig in water
- Technology
- CASE Ingredients
- Coating End Applications
- 2K (2 component) Coating
- Properties and Fields of use
LIOPUR PFL 1154 is good after air-drying, film coatings based on LIOPUR PFL 1154 transparent films which are tack-free and exhibit good surface hardness. Films based on LIOPUR PFL 1154 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, LIOPUR PFL 1154 can be used in combination with water-emulsifiable polyisocyanates for air-drying, aqueous, 2-pack parquet floor varnishes. Compared with other 2-pack dispersions, LIOPUR PFL 1154 is distinguished by good grain enhancement of the wood for water-thinnable formulations. LIOPUR PFL 1154 contains NCO-reactive groups, so that a binder/hardener ratio of 100 : 10 can be recommended on the basis of our applicational tests. Two-pack formulations based on LIOPUR PFL 1154 and polyisocyanate which has been made water-miscible are distinguished by simple manual incorporation of the hardener component into the base paint, so that these formulations are also suitable for DIY applications.
- Compatible Substrates and Surfaces
- Plastics
- Wood
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 20-500 | mPas | AV-F-V005 |
| Minimum Film Forming Temperature | approx. 20 | °C | — |
| Non Volatile Content | 35 2 | w % | AV-F-F003 |
| Organic Solvent | max. 1 | — | — |
| pH | 7.0-8.5 | — | AV-F-P001 |
