Alco-EP-73 Plus™
ALCO-EP-73 PLUS™ is a premium, state-of-the-art, multipurpose aluminum complex grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance characteristics. The non-plating, organic EP/anti-wear additives allow ALCO-EP-73 PLUS to be used where tolerances are low and/or speeds are high.
Product families
Applications
- Marine Fluids & Lubricants
Product Families
- Greases
Other characteristics
- Brand
- Alco-EP-73 Plus
- Features
Anti-Wear Properties, Corrosion Resistant, Extreme Pressure Performance, Oxidation Resistant, Service Life Extension, Water Resistant
- Product Type
- Grease
- Thickener Type
- Aluminum Complex
- Compatible Substrates & Surfaces
- Metal
- Markets
- Automotive & Transportation
- Benefits
- High strength fluid film.
- Extreme resistance to rust & corrosion.
- Strong adhesion properties.
- Pumpable.
- Timken load - 45 lbs.
- Appearance
- Red Sticky Grease
- Technology
- Ready-to-Use Products
- HIGHLIGHTS
ALCO-EP-73 PLUS also contains polymer additives; further enhancing the inherent water resistance of an aluminum-complex-based grease. ALCO-EP-73 PLUS is extremely resistant to rust and corrosion and ideally suited for use in high-moisture areas, including subsea applications.; Superior rust and corrosion protection for maximum service life under harsh conditions.; Polymer additives for extreme water resistance.; Aluminum complex base.; Exceeds Military specification MIL-G-18458B-SH.; Approved for use on squnch & RL-4 and other similar oilfield connections.
- Ready to Use Product Features
- Anti-Wear Properties
- Corrosion Resistant
- Extreme Pressure Performance
- Oxidation Resistant
- Service Life Extension
- Water Resistant
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
18 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 4-Ball Weld Point | 315.0 | kgf | ASTM D-2596 |
| Additive Type | EP/AW, R&O | — | — |
| Autoignition Point (Calculated) | min. 500 | °F | — |
| Copper Strip Corrosion | 1A | — | ASTM D-4048 |
| Density | 7.6 | Ib./gal | — |
| Dropping Point | min. 500 | °F | — |
| Dropping Point | min. 500 | °F | ASTM D-566 |
| Flash Point | min. 430 | °F | ASTM D-92 |
| Fluid Type | Lubricating Oil | — | — |
| Load Wear Index | 38.0 | — | — |
| NLGI Grade | 2.0 | — | — |
| Operating Temperature | -25 - 450 | °F | — |
