Jet-Plex EP™
Jet-Plex EP™ is the ideal multipurpose grease for use in extreme pressure and high temperature operating conditions. It is the top of the line product for severe applications and general purpose lubricant.
Product families
Applications
- Chassis & Brake
- Equipment & Parts
Product Families
- Greases
Other characteristics
- Brand
- Jet-Plex EP
- Features
Anti-Wear Properties, Corrosion Resistant, Excellent Lubricity, Extreme Pressure Performance, High Temperature Performance, Oxidation Resistant, Water Resistant, Wide Temperature Operating Range
- Product Type
- Grease
- Thickener Type
- Lithium Complex
- Application Area
- Bearings, Chassis, Slides
- Bearings
- Chassis
- Slides
- Markets
- Automotive & Transportation
- Industrial
- Appearance
- Red
- Technology
- Ready-to-Use Products
- Base Oil
- Petroleum Based
- HIGHLIGHTS
JET-PLEX-EP is manufactured from carefully selected petroleum oils and lithium complex soap to create a multipurpose grease with a dropping point of 550°F (288°C). It has a smooth texture with a heavy body consistency, but provides good pumpability in both hot and cold operating temperatures. JET-PLEX-EP has excellent resistance to water and water washout problems. Oil separation is minimal even under extreme pressure. Heat cycling pro- duces only a minor change in consistency. JET-PLEX- EP is formulated with special lubricity, anti-wear, and ex- treme pressure additives and fortified with rust, corrosion and oxidation inhibitors.; Lithium complex base; Excellent for high temperatures, high load applications - will not run or pound out; NLGI GCLB; Extremely resistant to rust and oxidation.
- Ready to Use Product Features
- Anti-Wear Properties
- Corrosion Resistant
- Excellent Lubricity
- Extreme Pressure Performance
- High Temperature Performance
- Oxidation Resistant
- Water Resistant
- Wide Temperature Operating Range
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 4 Ball Weld Point | 315.0 | — | ASTM D-2596 |
| Additive Type | Organic EP/AW, R&O | — | — |
| Approximate Safe DN Limit | 50 - 100000 | — | — |
| Autoignition Point (Calculated) | min. 500 | °F | — |
| Base Oil Viscosity (40°C) | 680.0 | cSt | ASTM D-445 |
| Copper Strip Corrosion | 1A | — | ASTM D-4048 |
| Density | 7.6 | lbs./gal | — |
| Dropping Point | min. 550 | °F | ASTM D-2265 |
| Flash Point | min. 430 | °F | ASTM D-92 |
| Fluid Type | Petroleum Oil | — | — |
| Load Wear Index | 50.0 | — | ASTM D-2596 |
| NLGI Grade | 2.0 | — | — |
