Alco-EP ECF™
Alco-EP ECF™ is a premium, state-of-the-art, multipurpose complex grease thickening a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian “Yellow” and the combined UK and Netherlands “E” categories. These are the safest environmental ratings for lubricating grease. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high.
Product families
Applications
- Marine Fluids & Lubricants
Product Families
- Greases
Other characteristics
- Brand
- Alco-EP
- Features
Anti-Wear Properties, Biodegradable, Corrosion Resistant, Excellent Compatibility, Service Life Extension, Water Resistant
- Product Type
- Grease
- Markets
- Automotive & Transportation
- Benefits
- Non-plating, organic EP / Anti-wear additives.
- Contains polymer additives.
- Water-resistant.
- Superior rust & corrosion protection.
- Biodegradable.
- Appearance
- Synthetic, Vegetable Oils
- Technology
- Ready-to-Use Products
- Base Oil
- Synthetic Oil
- Vegetable Oil
- Certifications
ALCO EP ECF carries EU certification/registrations.; Eco-Certified; Environmental Rating: UK CEFAS OCNS Group E; MIL-G-18458B-SH; EU certification/registrations:; Norway - Yellow; Netherlands & UK:E; Denmark PR#: 2324093
- HIGHLIGHTS
ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. ALCO-EP ECF is extremely resistant to rust and corrosion and is ideally suited for use in high moisture areas, including subsea applications.. • Excellent elastomer compatibility • Superior rust and corrosion protection for maximum service life under harsh conditions • Polymer additives for extreme water resistance • Biodegradable • Exceeds Military specification MIL-G-18458B-SH • Approved for use on squnch & RL-4 and other similar oilfield connections. This product is formulated to contain no detectable, leachable, volatile organics by EPA Test Method 1311- TCLP number SW846 8260B as determined by independent, 3rd party testing.
- Ready to Use Product Features
- Anti-Wear Properties
- Biodegradable
- Corrosion Resistant
- Excellent Compatibility
- Service Life Extension
- Water Resistant
Technical data
Table 1 of 1
16 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Additive Type | EP/AW, R&O | — | — |
| Approximate Safe DN Limit | 400000.0 | — | — |
| Autoignition Point (Calculated) | min. 500 | °F | — |
| Copper Strip Corrosion | 1A | — | ASTM D-4048 |
| Density | 8.0 | Ib./gal | — |
| Dropping Point | min. 500 | °F | ASTM D-566 |
| Flash Point | min. 430 | °F | ASTM D-92 |
| Fluid Type | Lubricating Oil | — | — |
| NLGI Grade | 2.0 | — | — |
| Operating Temperature | -10 - 450 | °F | — |
| Oxidation Resistance (PSI Drop, 100 Hrs) | max. 5 | — | ASTM D-942 |
| Penetration (77°F) | 265 - 295 | — | ASTM D-217 |
