Jacking Grease™ ECF™
Jacking Grease™ ECF™ is safe to use in offshore applications since it is metal free and is formulated to conform to the strict North Sea Environmental Guidelines. It utilizes a water resistant, calcium thickener that is enhanced to improve adhesion and provide greater protection against water wash off, wear, and corrosion. JET-LUBE JACKING SYSTEM GREASE ECF contains specially selected solid bounding lubricants to provide outstanding galling resistance and lubrication properties. The solid boundary additives synergistically combine to produce a superior lubricating film with high-load and low-wear characteristics. The base oil blend of this product is of lower viscosity than most multipurpose greases allowing it greater potential for bio degradation and contains additional anti-wear, anti rust, and antioxidant additives..
Product families
Applications
- Equipment & Parts
Product Families
- Greases
Other characteristics
- Brand
- Jacking Grease
- Features
Anti-Oxidant, Anti-Wear Properties, Biodegradable, Corrosion Resistant, Dynamic Load Resistance, Good Weather Fastness, High Film Stiffness, Improved Adhesion, Water Resistant, Wide Temperature Operating Range
- Product Type
- Grease, Lubricant
- Grease
- Lubricant
- Thickener Type
- Calcium Sulfonate Complex
- Application Area
- Gears, Slides
- Gears
- Slides
- Markets
- Industrial
- Benefits
- Excellent Environmental Properties.
- High Load Resistance.
- Water Resistant.
- Corrosion Resistant.
- Nonmetallic.
- Safe for Offshore Personnel.
- Biodegradable, does not bio-accumulate.
- Outstanding Film Strength.
- Appearance
- Beige Tacky Grease
- Technology
- Ready-to-Use Products
- Base Oil
- Vegetable Oil
- Certifications
Environmental Rating: UK CEFAS OCNS Group D.; Conforms to the strict North Sea Environmental Guidelines.; EPA 1311-TCLP.; Eco-Certified.
- Ready to Use Product Features
- Anti-Oxidant
- Anti-Wear Properties
- Biodegradable
- Corrosion Resistant
- Dynamic Load Resistance
- Good Weather Fastness
- High Film Stiffness
- Improved Adhesion
Technical data
Table 1 of 1
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 4-Ball Weld Point | min. 800 | kgf | ASTM D-2596 |
| Average Viscocity (10rpm and 20rpm) | 273000.0 | cps | — |
| Average Viscocity (5rpm and 10rpm) | 462000.0 | cps | — |
| Brookfield Viscosity (10rpm) | 332000.0 | cps | — |
| Brookfield Viscosity (20rpm) | 214000.0 | cps | — |
| Brookfield Viscosity (5rpm) | 592000.0 | cps | — |
| Complex Specific Gravity | 1.26 | — | — |
| Cone Penetration (77°F) | 275 - 300 | — | ASTM D-217 |
| Density | 10.55 | lbs/gal | — |
| Dropping Point | min. 500 | °F | ASTM D-2265 |
| Fluid Type | Synthetic, Vegetable | — | — |
| Oil Separation | max. 1 | % | — |
