FMG™
FMG™ is an aluminum complex grease lubricant of the USDA Authorized H-1 type. It meets or exceeds the requirements of FDA Regulations and is specifically designed for use in the food processing industry where it may have incidental food contact. FMG has been formulated to perform in a wide variety of operating conditions. It is extremely water resistant and will remain in place even after frequent wash downs. Polymer additives provide adhesive/cohesive strength to protect against pound-off when shock loads are encountered.
Product families
Applications
- Equipment & Parts
Product Families
- Greases
Other characteristics
- Brand
- FMG
- Features
Anti-Wear Properties, Bacteria Resistant, Food Contact Acceptable, Fungus Resistant, Water Resistant, Wide Temperature Operating Range; Aluminum Complex Grease.; Polymer Additives.; Non-Pound Out Formula.; Bacteriostatic Agent.; Anti-Wear Additives.
- Product Type
- Grease
- Thickener Type
- Aluminum Complex
- Application Area
- Bearings, Food Processing
- Bearings
- Food Processing
- Markets
- Industrial
- Benefits
- Extremely Water Resistant.
- Adhesive/Cohesive Strength.
- Reduced Lube Consumption.
- Retards Bacteria/Fungus Growth.
- Appearance
- White Grease
- Technology
- Ready-to-Use Products
- Base Oil
- Synthetic Oil
- Certifications
NSF H1 Registered #048225 (NLGI 1), #048226 (NLGI 2), #131548 (NLGI 3); Conforms to FDA Regulations CFR 21 Section 178.3570 for Incidental Food Contact
- HIGHLIGHTS
FMG can be used in a wide range of temperatures from 0°F (- 18°C) to over 400°F (204°C). It is recommended for the lubrication of roller, needle, ball, journal, and sliding bearings in the food processing and handling industry.
- Certifications and Compliance
- FDA 21 CFR 178.3570
- USDA Certified
- Ready to Use Product Features
- Anti-Wear Properties
- Bacteria Resistant
- Food Contact Acceptable
- Fungus Resistant
- Water Resistant
- Wide Temperature Operating Range
Technical data
Table 1 of 1
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| 4-Ball Weld Point | 400 - 500 | kgf | ASTM D-2596 |
| Additive Type | Zinc Sulfide, Organic, R&O | — | — |
| Autoignition Point (Calculated) | min. 500 | °F | — |
| Copper Strip Corrosion | 1A | — | ASTM D-4048 |
| Density | 7.8 | Ib./gal | — |
| Dropping Point | min. 500 | °F | ASTM D-566 |
| Flash Point | min. 430 | °F | ASTM D-92 |
| Fluid Type | White Oils, Synthetic | — | — |
| Load Wear Index | 50.0 | — | — |
| NLGI Grade | 2.0 | — | — |
| Operating Temperature | 0 - 400 | °F | — |
| Oxidation Resistance (Base Oil Viscosity, 40°C) | 90 - 110 | cSt | ASTM D-445 |
