To catalogue
TPE Solutions TPV 165A
TPE Solutions TPV 165A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 165A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Other Consumer Goods Applications; Electrical & Electronics — Other Electrical & Electronics Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
- Other Automotive Applications
Building & Construction — Building Materials
- Other Building Materials
- Pipes & Plumbing
- Structural Components
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
- Other Devices & Assemblies
Healthcare & Pharma — Medical
- Medical Devices & Assemblies
Electrical & Electronics — Wire & Cable
- Other Wire & Cable Applications
Product Families
Elastomers — Thermoplastic Elastomers
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Polymer Name
- Thermoplastic Vulcanizate (TPV)
- Tear Strength
- 27.0 - 34.0 kN/m
- Processing Methods
- Extrusion, Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Technology
- Elastomers
- Material Features
- Chemical Resistant
- Cost Effective
- Oil Resistant
- Plastics and Elastomers End Uses
- Appliances
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Building Hardware
- Cables
- Construction Applications
- Consumer Applications
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set [125C, 70H] | 45 - 40 | % | ASTM D395 |
| Hardness | 59 - 64 | Shore A | ASTM D2240 |
| IRM 903 Oil (Volume Swell) | 106 - 110 | % | ASTM D471 |
| Ozone Resistance | Good | — | ASTM D1149 |
Table 2 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength | 7.6 - 7.7 | Mpa | ASTM D412 |
| Ultimate Elongation | 540 - 670 | % | ASTM D412 |
| Tear Strength | 27 - 34 | kN/m | ASTM D624 (Die C) |
| Tensile Modulus (100%) | 2.1 - 2.7 | Mpa | ASTM D412 |
Table 3 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Brittle Point | -60 to -70 | °C | ASTM D746 |
| Specific Gravity (23°C) | 0.97 | g/cm³ | ASTM D792 |
