To catalogue
TPE Solutions TPV 135A
TPE Solutions TPV 135A is an EPDM/PP TPV compound designed to replace thermoset elastomers such as polychloroprene (Neoprene) and EPDM compounds as well as sponge. This grade is a Shore 35A fully vulcanized EPDM/PP TPV. This grade is black and designed for applications that require low hardness. Ideal for applications in the Automotive and Building Construction market that requires excellent ozone and uv resistance. TPV rubber provides the advantage of low-cost thermoplastic processing such as Injection Molding, Extrusion and blow molding.
Product families
Applications
Applications
- Industrial — Maintenance
- Repair & Overhaul
Agriculture & Feed — Agricultural Films
- Pipes & Hoses
Automotive & Transportation — Automotive
- Cooling & Climate
- Fuel Systems
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Electrical & Electronics — Wire & Cable
- Jacketing & Insulation
Product Families
Elastomers — Thermoplastic Elastomers
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Polymer Name
- Thermoplastic Vulcanizate (TPV)
- Tear Strength
- 16.0 - 16.0 kN/m
- Processing Methods
- Blow Molding, Extrusion, Injection Molding
- Markets
- Agriculture & Feed
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Industrial
- Flame Rating
- UL 94 HB
- Technology
- Elastomers
- Material Features
- Cost Effective
- Low Hardness
- Ozone Resistant
- UV Resistant
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Cable Jacketing
- Diaphragms
- Gaskets
- Tubes
- Valves
- Plastics and Elastomers Processing Methods
- Blow Molding
- Extrusion
- Injection Molding
Technical data
Table 1 of 3
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (100 %) | 0.7 | Mpa | ASTM D412 |
| Tensile Strength | 4.3 | Mpa | ASTM D412 |
| Ultimate Elongation | 635 | % | ASTM D412 |
| Tear Strength | 16 | kN/m | ISO 34 (Die C) |
| Flammability | Pass | — | UL94-HB |
Table 2 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set | 25 | % | ISO 815 |
| Hardness | 37 | Shore A | ASTM D2240 |
| Ozone Resistance | Good | — | ASTM D1149 |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity (23°C) | 0.93 | g/cm³ | ASTM D792 |
