To catalogue
TPE Solutions TPV 140A
TPE Solutions TPV 140A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 140A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Other Consumer Goods Applications; Electrical & Electronics — Other Electrical & Electronics Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
- Other Automotive Applications
Building & Construction — Building Materials
- Other Building Materials
- Pipes & Plumbing
- Structural Components
Industrial — Chemical & Industrial Manufacturing
- Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
- Other Devices & Assemblies
Healthcare & Pharma — Medical
- Medical Devices & Assemblies
Electrical & Electronics — Wire & Cable
- Other Wire & Cable Applications
Product Families
Elastomers — Thermoplastic Elastomers
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Polymer Name
- Thermoplastic Vulcanizate (TPV)
- Tear Strength
- 11.5 - 11.5 kN/m
- Processing Methods
- Extrusion, Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Flame Rating
- UL 94 HB
- Technology
- Elastomers
- Material Features
- Chemical Resistant
- Cost Effective
- Oil Resistant
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Appliances
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Building Hardware
- Cables
- Construction Applications
- Consumer Applications
- Plastics and Elastomers Processing Methods
- Extrusion
- Injection Molding
Technical data
Table 1 of 3
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus (100 %) | 0.9 | Mpa | ASTM D412 |
| Tensile Strength | 5 | Mpa | ASTM D412 |
| Ultimate Elongation | 500 | % | ASTM D412 |
| Tear Strength | 11.5 | kN/m | ISO 34 (Die C) |
| Flammability | Pass | — | UL94-HB |
Table 2 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compression Set | 26 | % | ISO 815 |
| Hardness | 40 | Shore A | ASTM D2240 |
| Ozone Resistance | Good | — | ASTM D1149 |
Table 3 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity (23°C) | 0.93 | g/cm³ | ASTM D792 |
