Nils Malmgren AB NM El Epoxi 960
- Chemical Family
- Epoxy & Epoxy Derivatives
NM El Epoxy 960/980 is a two component low-viscosity epoxyresin for casting and impregnation. Theresin is colored dark blue. The air-release when casted is normally very good, but encapsulation of coils might need use of vacuum.
Product families
Applications
- Tooling & Moldmaking
Product Families
- Thermoset Resins
Other characteristics
- End Uses
- Mold Making
- Polymer Name
- Epoxy Resins & Compounds
- Color
- Blue
- Markets
- Industrial
- Observe!
Do not leave any resin-mixture in the plastic bottle. The exothermic heat might melt the bottle.
- Cure
- Heat Cure
- Technology
- Composite Materials
- Normal Packing
- 0.525 + 0.225 = 0.750 kg
- Material Features
- Low Temperature Curing
- Low Viscosity
- Chemical Resistance
- Acetone
- Typical Applications
- Incapsulation of electronic components.
- Impregnation of winded coils
- Processing Instruction
When mixing a full pack, pour the hardener into the bigger bottle of resin. Put on the cap again and shake the bottle for some minutes. If smaller portions shall be used, it is necessary to use a scale for accurate weight of the components. Casting volumes exceeding 150 ml should cure at lowered temperature to avoid shrinking stress caused by high exothermic heat.. Cure the cast mixture for at least 24 hours at 23°C. Curing at elevated temperature, for ex. +40°C, will reduce the time to eight hours.
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Plastics and Elastomers End Uses
- Mold Making
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Resin | NM El Epoxi 960 | — |
| Hardener | NM Härdare 980 | — |
| Mixing Ratio (Weight, Volume) | 70 - 30 (100 - 51) | — |
| Hardness | 80 | — |
| Density | 1088 | kg/m³ |
| Viscosity | 250 | mPa·s |
| Pot Life (100g 20°C) | 60 | minutes |
| Compressive Strenght | 120 | MPa |
| Tensile Strenght | 50 | MPa |
| Coeficient Thermal Expansion | 60·10^{ - 6} | cm/cm·°C |
| Volume Resistivity | 10^15 | Ohm-cm |
| HDT | 50 | °C |
