Nils Malmgren AB NM ME 585
- Chemical Family
- Epoxy & Epoxy Derivatives
NM ME 585 is a low viscosity, room temperature curing solvent free epoxy resin with all-round properties, i.e. modeling and production of molds.
Product families
Applications
- Tooling & Moldmaking
Product Families
- Thermoset Resins
Other characteristics
- End Uses
- Mold Making
- Polymer Name
- Epoxy Resins & Compounds
- Processing Methods
- Hand Lay-up, Vacuum Infusion Processing (VIP)
- Usage
NM ME 585 can be used for laminating as well as adhesive. It can be filled with sand or aluminum powder for backing. NM ME 585 has a friendly environment profile, and contains no unreactive products labeled as hazardus to the environment.
- Color
- Transparent
- Markets
- Industrial
- Pot Life
Potlife for NM ME 585 / NM Hardener 586 with different amounts of NM Accelerator 254. The values are for 100 gms of NM ME 585 / NM Hardener 586 with a initial temperature of 20°C. The percent adding is calculated as ex. 100 gms + 1 gm.. NM ME 585 has a quite long pot life, and produce very little heat build-up. It can be accelerated up to 10% with NM Accelerator 254. NM ME 585 can be thixotropated with NM Filler 51 for the use as adhesive. The wetting is good to most substrates.
- Technology
- Composite Materials
- Chemical Resistance
- Acetone
- Typical Applications
- Producing of epoxy laminates
- Reparation of damages to laminates
- Adhesive
- Backing
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Hand Lay-up
- Vacuum Infusion Processing (VIP)
- Plastics and Elastomers End Uses
- Mold Making
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Cleaning Solvent | Acetone | — |
| Resin | NM ME 585 | — |
| Hardener | NM Harderner 586 | — |
| Mixing Ratio (Weight, Volume) | 100 - 44 (100 - 51.2) | — |
| Density | 1114 | kg/m3 |
| Viscosity (25°C) | 650 | mPa·s |
| Pot Life (100g 20°C) | 50 | hour |
| Potlife 100G 20°C (+10% Accelerator 254) | 12 | minutes |
| Compressive Strength | 105 | MPa |
| Tensile Strength | 45 | MPa |
| Flexural Strength | 106 | MPa |
| Modulus of Elasticity[Flexural] | 3.1 | GPa |
