GEHR POM® 10 PE-TF (GLIDE)

GEHR POM® 10 PE-TF (GLIDE) is new material in which the tribological behavior (friction) has been optimized by incorporating solid lubricants. Thanks to these solid lubricants, we achieve a high wear resistance, a low coefficient of friction and thus a good dry running capability. In addition to the standard features, these plastic materials also have excellent emergency running properties, good damping properties as well as optimized chemical resistance and oxidative stability. Their abrasion behavior is also positively influenced by the firmly integrated PTFE additive, which is not harmful to health

Properties

Physical Form: Custom, Rods, Sheets
Custom
Rods
Sheets

Other characteristics

Brand: GEHR POM
Color: Blue
Density: 1300.0 - 1360.0 kg/m³
Features: Anti-Wear Properties, Chemical Resistant, Corona Treated, Good Abrasion Resistance, Good Damping, Good Strength, Low Friction, Oxidation Resistant
Polymer Name: Polyacetal Copolymer (POM)
Odor: Odorless
Markets: Agriculture & Feed
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Industrial
Storage: The products shall be stored indoor to keep away from any source of degradation such as sunlight, UV-jets, ionizing radiation, chemicals.
Machining: The product can be machined with standard machinery and tools. Before machining the product should be stored at room temperature 24 h. Evacuate swarf to prevent slipping or tripping. Observe the maximum allowable concentration of dust and formaldehyd levels on the working area which apply in your country. Wear safety goggles during machining. General dust limit value: Respirable dust (6 mg/m3); Inhalable dust (10 mg/m3 ).
Properties: High wear resistance; Low coefficient of friction; Good dry running capability; Excellent emergency running properties; Good damping properties; Optimized chemical resistance and oxidative stability
Flame Rating: UL 94 HB
Insoluble In: Water
Technology: Plastics
Safety Measures: The general industrial safety measures should be considered. A thermal damage during machining should be avoided.
Product Families: Plastics — Parts, Shapes & Films
Additives Included: Lubricant (PTFE)
Form and Condition: Rods. Sheets / Solid
Material Features: Anti-Wear Properties
Chemical Resistant
Corona Treated
Good Abrasion Resistance
Good Damping
Good Strength
Low Friction
Oxidation Resistant
Certifications and Compliance: UL 94

Technical data

Table 1 of 6

7 rows

Characteristic	Value	Unit	Method
Tensile Strength at Yield	35	MPa	ISO 527
Elongation at Yield (S)	7	%	ISO 527
Elongation at Break (R)	8	%	ISO 527
Impact Strength (an)	18	kJ/m2	ISO 179
Notch impact Strength (ak)	2	kJ/m2	ISO 179
Hardness	78	Shore D	ISO 868
Modulus of elasticity (Et)	2000	MPa	ISO 527

Table 2 of 6

5 rows

Characteristic	Value	Unit	Method
Specific Gravity	1.4	—	ISO 1183
Water Absorption	0.7	%	ISO 62
Humidity Absorption	0.2	%	ISO 62
Maximum Permissible Service Temperature	100	°C	UL746B
Lower Permissible Service Temperature	-40	°C	UL746B

Table 3 of 6

1 row

Characteristic	Value	Unit	Method
Melting Temperature (Tm)	163	°C	ISO 3146

Table 4 of 6

4 rows

Characteristic	Value	Unit
Density	1.30 - 1.36	g/cm³
Melting Temperature	163 - 168	°C
Thermal Decomposition	min. 240	°C
Ignition Temperature	320 - 340	°C

Table 5 of 6

6 rows

Characteristic	Value	Unit	Method
Volume Resistivity	min. 10^13	Ω.cm	IEC 60093
Surface Resistivity (Ro)	min. 10^13	Ω	IEC 60093
Dielectric Constant (1MHz)	3.7	—	IEC 60250
Dielectric Loss Factor (1 MHz)	8	—	IEC 60250
Dielectric Strength	16	kV/mm	IEC 60243-1
Dielectric Strength	33	kV/mm	IEC 60243-1

Table 6 of 6