To catalogue
FIL-A-GEHR® PEEK
- Chemical Family
- Polyether Ether Ketone (PEEK)
FIL-A-GEHR® PEEK is a Polyetheretherketone ranks among the high Performance thermoplastics thanks to its high melting point of 343 °C and its maximum continuous operating temperature of 260 °C. Its particular chemical structure makes PEEK largely stable against thermal and chemical damage and permits its usage inside the body. In case of fire, the smoke development of PEEK is the lowest of all thermoplastics; the material is therefore used in aviation. FIL-A-GEHR PEEK® is an experimental filament with a processing temperature of 375 °C in the heated chamber (180 °C). The material is specifically apt for use on 3D printers.
Properties
- Physical Form
- Filament
Product families
Applications
Automotive & Transportation — Transportation
- Aerospace & Aviation
Product Families
Plastics — 3D Printing Polymers
- Thermoplastic Filament
Other characteristics
- Brand
- FIL-A-GEHR
- Density
- 1290.0 - 1290.0 kg/m³
- End Uses
- Aerospace Applications, Aircraft Interiors
- Polymer Name
- Polyetheretherketone (PEEK)
- Color
- Natural
- Markets
- Automotive & Transportation
- Features
- High stiffness, elastic modulus 3830 MPa
- Resistance against many chemicals
- Maximum continuous operating temperature 260 °C
- Print temperature 375 °C
- Chamber temperature 180 °C
- Technology
- Plastics
- Packaging Type
- Bags
- Labeling Claims
- Odor-free
- Material Features
- Chemical Resistant
- Excellent Elasticity
- Excellent Flow Properties
- Excellent Intercoat Adhesion
- Excellent Performance
- Good Shrinkage Resistance
- Good Thermal Stability
- High Melting Point
- Plastics and Elastomers End Uses
- Aerospace Applications
- Aircraft Interiors
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Volume Rate (MVR, 380°C/5 kg) | 4.75 | cm³/10 min | ISO 11357 |
| Tensile Stress at Yield | 94.5 | MPa | ASTM D638 |
| Tensile Modulus | 3500 | MPa | ASTM D638 |
| Density | 1290 | kg/m³ | ASTM D792 |
| Water Absorption | 0.1 | % | ASTM D570 |
| Heat Deflection Temperature (HDT/A) | 157 | °C | ASTM D648 |
| Drying | 3 - 4 h 130 - 140 | °C | — |
| Optimal Nozzle Temperature | 380 - 410 | °C | — |
| Bed Temperature | ~ 180 | °C | — |
| Bedrock | BuildTak plate | — | — |
