GEHR PEEK® 30CF
- Chemical Family
- Polyether Ether Ketone (PEEK)
GEHR PEEK® 30CF is a variant of PEEK modified with 30 % carbon fibers. As with the glass-fiber reinforced type, the surface hardness and heat deflection temperature are also significantly increased compared to the already high values of the unreinforced standard type. This material owes its significantly increased dimensional stability to its extremely low coefficient of linear expansion. The electrical properties are influenced by the high proportion of carbon fibers and must be taken into account in the relevant applications.
Properties
- Physical Form
- Rods
Other characteristics
- Brand
- GEHR PEEK
- Color
- Black
- Density
- 1300.0 - 1550.0 kg/m³
- Features
Chemical Resistant, Creep Resistant, Dimensional Stability, Excellent Hydrolysis Resistance, Excellent Mechanical Strength, Excellent Surface Hardness, Good Thermal Stability, High Heat Deflection Temperature, High Rigidity, Odorless, Radiation Resistant
- Polymer Name
- Polyetheretherketone (PEEK)
- Reinforcement Material
- Carbon Fibers
- Odor
- Odorless
- Markets
- Consumer Goods
- Electrical & Electronics
- Industrial
- Storage
The products shall be stored indoor to keep away from any source of degradation such as sunlight, UV-jets, ionizing radiation, chemicals.
- Machining
The product can be machined with standard machinery and tools. Before machining the product should be stored at room temperature 24 h. Evacuate swarf to prevent slipping or tripping. Observe the maximum allowable concentration of dust and formaldehyd levels on the working area which apply in your country. Wear safety goggles during machining. General dust limit value: Respirable dust (6 mg/m3); Inhalable dust (10 mg/m3 ).
- Properties
- Very high mechanical strength
- Very high rigidity (also at low temperature)
- Very high thermal stability
- Very high creep resistance
- Very high dimensional stability
- Very high radiation resistance
- Very high hydrolysis resistance
- Relatively low notch impact strength
- Flame Rating
- UL 94 V0
- Insoluble In
- Water
- Technology
- Composite Materials
- Plastics
- Labeling Claims
- Odor-free
- Safety Measures
The general industrial safety measures should be considered. A thermal damage during machining should be avoided.
- Fillers Included
- Carbon Fiber
- Form and Condition
- Rods. Sheets / Solid
- Material Features
- Chemical Resistant
- Creep Resistant
- Dimensional Stability
- Excellent Hydrolysis Resistance
- Excellent Mechanical Strength
- Excellent Surface Hardness
- Good Thermal Stability
- High Heat Deflection Temperature
Technical data
Table 1 of 6
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Yield | 122 | MPa | ISO 527 |
| Elongation at Yield (S) | 7 | % | ISO 527 |
| Tensile Strength at Break | 122 | MPa | ISO 527 |
| Elongation at Break (R) | 7 | % | ISO 527 |
| Impact Strength (an) | 50 | kJ/m2 | ISO 179 |
| Notch impact Strength (ak) | 5 | kJ/m2 | ISO 179 |
| Ball Indentation (Rockwell Hardness) | 312 (M 102) | MPa | ISO 2039 |
| Hardness | 92 | Shore D | ISO 868 |
| Flexural Strength (B 3,5 %) | 193 | MPa | ISO 178 |
| Modulus of elasticity (Et) | 6800 | MPa | ISO 527 |
Table 2 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 1.4 | — | ISO 1183 |
| Water Absorption | 0.35 | % | ISO 62 |
| Humidity Absorption | 0.16 | % | ISO 62 |
| Maximum Permissible Service Temperature | 260 | °C | UL746B |
| Lower Permissible Service Temperature | -20 | °C | UL746B |
Table 3 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (HDT/A) | 336 | °C | ISO 75 |
| Coefficient of Linear Thermal Expansion | 0.25 | K-1.10-4 | ISO 11359 |
| Thermal Conductivity (20°C) | 0.9 | W/(m.K) | ISO 22007-4 |
| Glass Transition Temperature (Tg) | 143 | °C | ISO 3146 |
| Melting Temperature (Tm) | 343 | °C | ISO 3146 |
Table 4 of 6
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 1.30 - 1.55 | g/cm³ |
| Melting Temperature | min. 330 | °C |
| Ignition Temperature | min. 590 | °C |
Table 5 of 6
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | min. 10^5 | Ω.cm | IEC 60093 |
| Surface Resistivity (Ro) | min. 10^5 | Ω | IEC 60093 |
Table 6 of 6
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bondability | Yes | — | — |
| Physiological Indifference | Yes | — | EEC |
| Flammability | V-0 | — | UL 94 |
| Limiting Oxygen Index (LOI, 9) | 40 | % | ASTM D2863 |
| UV Stabilisation (6, 9) | Yes/Limited | — | — |
