2MILA LA2175
- Chemical Family
- PolyethylenesPolyolefins
2MILA LA2175 is intended for national economy needs, for manufacture of general purpose films, bags and packages, thin films and film products, shrinkable films, films for food contact (including air -tight packing), for high-speed lamination by extrusion of such materials as paper, aluminum foil, cardboard etc. To be used as well for casting of small-sized articles (covers, caps, toys) and articles approved for packing and sealing of medicines.
Properties
- Physical Form
- Pellets
- Solid
Product families
Applications
- Consumer Goods — Sports & Recreation
- Food & Beverage Packaging
- Healthcare Packaging
- Industrial & Transport Packaging
- Non-Food Consumer Packaging
Product Families
- Polyolefins
Other characteristics
- Polymer Name
- Low Density Polyethylene (LDPE)
- Processing Methods
- Cast Film Extrusion, Extrusion, Film Extrusion
- Markets
- Consumer Goods
- Printing & Packaging
- Storage
Storage: polyethylene shall be stored in enclosed dry space preventing from direct sunlight on shelves or pallets at least 5 cm from the floor and at least 1m from heaters, at a temperature max 30°C, relative humidity max 80%. Prior to processing bags with polymer shall be kept in production are for at least 12 hrs.
- Technology
- Plastics
- Packaging Type
- Bags
- Labeling Claims
- Food Contact Acceptable
- Material Features
- Food Contact Acceptable
- Packing and Supply Form
Supply form: Pallets Packing: Product is packed in polyethylene bags (one bag net weight 25.00 ±0,25kg) and stacked on flat pallets with shrink film. Maximum gross weight of a bundle is 2 tons. Transport: by all modes of transport.
- Certifications and Compliance
- ISO 9001
- Plastics and Elastomers End Uses
- Caps
- Film
- Food Packaging
- Medical Packaging
- Shrink Wrap
- Toys
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Cast Film Extrusion
- Extrusion
- Film Extrusion
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 0.9180 - 0.923 | g/cm3 |
| Melt Flow Index ((Nominal Value) With A Tolerance),%, G/10 Min | 6.50 ± 8.50 | %/g/10 min |
| Melt Flow Index Spread Within A Batch | max. ± 5 | % |
| Number of Inclusions | max. 2 | pcs |
| Tensile Yield Strength | min. 8 | MPa |
| Rupture Strength | min. 9 | % |
| Elongation at Break | min. 400 | % |
| Dynamic Modulus of Elasticity (Pa) | 95-110 | — |
| Zero-Shear Rate Viscosity | 3500-4500 | Pa.s |
| Mass Fraction of Extractable Substances | max. 0.3 | % |
